Fragrance Oils

All of our fragrance oils listed below have been tested/approved for use in cold process and hot process soap making. We list any discoloration, acceleration or ricing noted during our testing under each individual item. All are strong fragrances that will stick through saponification.
Sort By:  
$22.20
$25.20
$24.20
$25.20
$34.20
$24.20
$23.20
$13.60
$24.20
$22.20
$27.20
$25.20
$28.20
$22.20
$26.20
$25.20
Rio Radiance by Sol de Janeiro® Type

Escape eternally to the seaside. Immerse yourself in the reminiscent allure of this sun-kissed floral aroma, evoking memories of endless holidays. Revel in the captivating essence of creamy coconut milk, radiant tuberose, and sun-warmed sands.  Dupe of SOL Janeiro's popular Cheirosa '87 fragrance

* Compare our fragrance to Rio Radiance® SOL de Janeiro.


Flashpoint: > 200° F
Vanilla Content:  4.20%
Country of Origin: USA
Phthalates: Phthalate Free
Skin Safe:  Yes
Oil Color: 
Pale Yellow
Formulated For: 
Soap / Candle
Essential Oils In Fragrance: 
Lemon

Top Notes:  Leite de Coco, Warm Sand 
Middle Notes:  Solar Tuberose, Ylang Ylang  
Bottom Notes:  Vanilla, Amber 

IFRA SHEET

IFRA Maximum Skin Exposure Levels:

Soap: 7.29%Body Wash: 7.29%Bath Bombs: 7.29%
Body Lotion: 14.11%Body Scrub: 7.29%Candles: 100%
Perfume: 54.23%Deodorant: 2.89%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 

Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with SOL de Janeiro.

$28.20
Rose Jam LUSH Type

Rose Jam LUSH Type features an intoxicating lemon-rose perfume. It's based on a decadent traditional Turkish recipe for rose jam that LUSH's Turkish rose absolute supplier shares with them every year.

* Compare our fragrance to Rose Jam® by LUSH.


Flashpoint: > 200° F
Vanilla Content:  1.80 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 2.82%Body Wash: 2.82%Bath Bombs: 2.82%
Body Lotion: 0.18%Body Scrub: 2.82%Candles: 100%
Perfume: 0.18%Deodorant: 0.18%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with LUSH.

$22.20
Rose Vanilla® Bath and Bodyworks Type

Description:  This sweet and sophisticated blend of rose oil and vanilla absolute creates a dreamy floral, sugary fragrance!

* Compare our fragrance to Rose Vanilla® by Bath and Bodyworks.


Flashpoint:  181 F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Skin Safe:  Yes
Oil Color:  Clear
Formulated For:  Soaps | Candles
Essential Oils in Fragrance:  Virginia Cedarwood Oil

Top Notes:  Rose
Middle Notes:  Vanilla
Bottom Notes:  Sugar

IFRA SHEET

IFRA Maximum Skin Exposure Levels:

Soap: 21.00%Body Wash: 21.00%Bath Bombs: 21.00%
Body Lotion: 2.75%Body Scrub: 21.00%Candles: 100%
Perfume: 10.75%Deodorant: 0.57%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Bath and Bodyworks.

$25.20
Rose Water & Ivy BBW Type

A fresh-cut bouquet of soft rose petals, rain-kissed ivy & soft musk.


* Compare our fragrance to Rose Water & Ivy® by Bath & Body Works.



Flashpoint:  >200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 50.00%Body Wash: 50.00%Bath Bombs: 50.00%
Body Lotion: 50.00%Body Scrub: %Candles: 100%
Perfume: 50.00%Deodorant: 10.00%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$25.20
Saijo Persimmon by Voluspa Type

SWEET ORANGE NOTES LAYERED WITH RED CURRANTS, PEACH AND LIGHT FLORALS.


* Compare our fragrance to Saijo Persimmon® by Voluspa


Flashpoint: 158° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 12.50%Body Wash: 12.50%Bath Bombs: 12.50%
Body Lotion: 0.05%Body Scrub: 12.50%Candles: 100%
Perfume: 0.05%Deodorant: 0.05%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Voluspa.

$24.20
Salted Pretzel Milkshake BBW Type

Description: Creamy Vanilla Ice Cream, Salty Pretzel Bits, Gooey Chocolate Drizzle. It's a completely YUMMY scent!

* Compare our fragrance to Salted Pretzel Milkshake® by Bath and Body Works.


Flashpoint: TBD° F
Vanilla Content:  TBD%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

Soap: TBD%Body Wash: TBD%Bath Bombs: TBD%
Body Lotion: TBD%Body Scrub: TBD%Candles: 100%
Perfume: TBD%Deodorant: TBD%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$31.20
Sandalwood Eucalyptus BBW Type

Description: A warm and fresh aroma combines sandalwood and eucalyptus to melt stress away.

* Compare our fragrance to Sandalwood Eucalyptus® by Bath & Body Works.



Flashpoint:  191° F
Vanilla Content:  0.24%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 21.28%Body Wash: 21.28%Bath Bombs: 21.28%
Body Lotion: 38.18%Body Scrub: 21.28%Candles: 100%
Perfume: 24.55%Deodorant: 6.36%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$28.20
Santiago Huckleberry by Voluspa Type

WILD HUCKLEBERRIES ARE MIXED WITH HINTS OF LEMON PEEL, VANILLA EXTRACT AND SUGAR CANE FOR A DELIGHTFUL FRUITY AROMA.

* Compare our fragrance to Santiago Huckleberry® by Voluspa


Flashpoint: 175° F
Vanilla Content:  0.30%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 50.71%Body Wash: 50.71%Bath Bombs: 50.71%
Body Lotion: 0.02%Body Scrub: 50.71%Candles: 100%
Perfume: 0.02%Deodorant: 0.02%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Voluspa.

$25.20
Satsuma by Body Shop Type

A LIGHT AND ZESTY ORANGE WITH A HINT OF MANDARIN AND GRAPEFRUIT.

This is an untested fragrance being brought in by our SSS - ISO Group.

* Compare our fragrance to Satsuma® by Body Shop.


Flashpoint: 131° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 40.00%Body Wash: 40.00%Bath Bombs: 40.00%
Body Lotion:%Body Scrub: 40.00%Candles: 100%
Perfume: %Deodorant:%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Body Shop.

$34.20
Silent Night

Tantalizing notes of citrus fruits intertwined with fresh pine anticipate merry holidays on a cool winter night. A warm, sweet bed of vanilla and sandalwood complete this cozy blend.

Flashpoint:  181° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap and Candle



IFRA Maximum Skin Exposure Levels:

Soap: 57.77%Body Wash: 57.77%Bath Bombs: 57.77%
Body Lotion: 10.54%Body Scrub: 57.77%Candles: 100%
Perfume: 40.51%Deodorant: 2.16%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

$24.20
Smoked Vanilla BBW Type

unique masculine and sultry scent! Smoked vanilla is intertwined with sandalwood, leather and southern bourbon to create this intriguing, rustic scent.


* Compare our fragrance to Smoked Vanilla by Bath & Bodyworks.

Flashpoint: > 200° F
Vanilla Content:  4.40%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 17.86%Body Wash: 17.86%Bath Bombs: 17.86%
Body Lotion: 40.00%Body Scrub: 17.86%Candles: 100%
Perfume: 21.43%Deodorant: 6.18%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Bodyworks.

$24.20
Snow Fairy LUSH Type

Citrus and festive berries meld with spicy undertones in this inviting blend. Amidst seasonal greens, velvety woods anchor the heart, while vanilla and soft musk envelope rich fruit notes. A hint of mint elevates, casting a wintery shimmer.

* Compare our fragrance to Snow Fairy® by LUSH.

Flashpoint:  178° F
Vanilla Content:  0.50%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap



IFRA Maximum Skin Exposure Levels:23.81

Soaps: 2.47%Body Wash: 2.47%Bath Bombs: 2.47%
Body Lotion: 0.59%Body Scrub: 2.47%Candles: 100%
Perfume: 1.26%Deodorant: 0.12%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Bodyworks.

$12.10
Sparkling Snowflakes

THIS ONE WILL CLEAR OUT YOUR SINUSES!  A CRISP EUCALYPTUS AND MINT COMBINATION SLIDE INTO A HEART OF CLEAN FLORAL NUANCES. A BASE OF LIGHT TONKA BEAN, SWEET MUSK AND SOOTHING SANDALWOOD COMPLETE THIS UNIQUE HOLIDAY BLEND.

Flashpoint:  >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap and Candle



IFRA Maximum Skin Exposure Levels:

Soap: 28.56%Body Wash: 28.56%Bath Bombs: 28.56%
Body Lotion: 3.57%Body Scrub: 28.56%Candles: 100%
Perfume: 14.28%Deodorant: 0.76%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

$11.60
Spiced Chestnuts BBW Type

Description: The warm aroma of toasted chestnuts paired with sweet spices and cider.

* Compare our fragrance to Spiced Chestnuts® by Bath & Body Works.



Flashpoint:  >200° F
Vanilla Content:  3.7%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 5.90%Body Wash: 5.90%Bath Bombs: 5.90%
Body Lotion: 0.77%Body Scrub: 5.90%Candles: 100%
Perfume: 3.01%Deodorant: 0.16%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Bath and Body Works.

$11.60
Strawberry Poundcake BBW Type

Warm, buttery poundcake is topped with luscious juicy strawberries and topped with freshly whipped cream. It's a winner in candles right now! Discolors to a dark brown in soaps.

* Compare our fragrance to Strawberry Poundcake® Bath & Body Works.


Flashpoint: > 200° F
Vanilla Content:  5.70 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

Soap: 100%Body Wash: 100%Bath Bombs: 100%
Body Lotion: 100%Body Scrub: 100%Candles: 100%
Perfume: 100%Deodorant: 100%Lip: 0.00%


How did it perform in Cold Process Soap?



INCI (International Nomenclature of Cosmetic Ingredients): 

Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Body Works.

$23.20
Suede Blanc by Voluspa Type

A luxe fragrance that mirrors high end men's cologne. Sophisticated and powerful, it blends together deep leather and rich cedar notes. Sexy!

* Compare our fragrance to Suede Blanc® by Voluspa


Flashpoint: >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Oil Color:  Pale Yellow
Formulated For:  Soap / Candle
Essential Oils In Fragrance:  Patchouli

Top Notes:  Leather
Middle Notes:  Saffron
Bottom Notes:  Musk, Cedar

IFRA SHEET

IFRA Maximum Skin Exposure Levels:

Soap: 13.71%Body Wash: 13.71%Bath Bombs: 13.71%
Body Lotion: 29.14%Body Scrub: 13.71%Candles: 100%
Perfume: 100%Deodorant: 6.28%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Voluspa.

$24.20
Sugar Plum Berries Peak Type

Sugar plums, sweet holiday berries, and a hint of spruce all rolled in sugary goodness! This fragrance feels so Christmas! Visions of sugar plums will certainly be dancing in your head.

* Compare our fragrance to Sugar Plum Berries® by Peak Candle.



Flashpoint: >200° F
Vanilla Content:  0.14 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 100.00 %Body Wash: 100.00 %Bath Bombs: 100.00 %
Body Lotion: 0.02 %Body Scrub: 100.00 %Candles: 100.00 %
Perfume: 0.02 %Deodorant: 0.02 %Lip: 0.00 %


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$13.60
Sun Drenched Apricot Rose
Sun Drenched Apricot Rose Yankee Candle Type

Juicy apricots are blended with soft rose petals to form this amazingly unique and well balanced scent! Brand new for 2018 from Yankee Candle. Sun Drenched Apricot Rose Yankee Candle Type is a molecular clone of the scent which is sold by Yankee Candle.


* Compare our fragrance to Sun Drenched Apricot Rose by Yankee Candle.

Flashpoint: > 200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 4.93%Body Wash: 4.93%Bath Bombs: 4.93%
Body Lotion: 0.11%Body Scrub: 4.93%Candles: 100%
Perfume: 0.11%Deodorant: 0.11%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Yankee Candle.

$24.20
Sweet Orange & Chili Pepper

Orange and lemony top notes are complimented with a sweet floral middle and a warm musk anchor. There are hints of tangerine and spicy black pepper with chili powder. 

Flashpoint: > 160° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 8.07%Body Wash: 8.07%Bath Bombs: 8.07%
Body Lotion: 0.01%Body Scrub: 8.07%Candles: 100%
Perfume: 0.01%Deodorant: 0.01%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

$22.20
Tattoo Parlor® Just Scent Type

An enchanting fragrance reminiscent of a serene spa experience, blending a lively floral symphony with the comforting essence of musk and tonka bean. Its green and distinctive character evokes a sense of tranquility and freshness.

* Compare our fragrance to Tattoo Parlor® by Just Scent.


Flashpoint:  181 F
Vanilla Content:  1.78%
Country of Origin: USA
Phthalates: NOT Phthalate Free

IFRA Maximum Skin Exposure Levels:

Soap: 21.28%Body Wash: 21.28%Bath Bombs: 21.28%
Body Lotion: 0.12%Body Scrub: 21.28%Candles: 100%
Perfume: 0.12%Deodorant: 0.12%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Just Scent.

$24.20
Tiki Beach BBW Type

FRESH CITRUS COMBINES WITH WILD ORCHIDS ON A BACKGROUND OF VANILLA MUSK AND SWEET SANDALWOOD.

This is an untested fragrance. 

* Compare our fragrance to Tiki Beach® dupe by Bath & Body Works.



Flashpoint:  178° F
Vanilla Content:  1.96 %
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 18.18 %Body Wash: 18.18 %Bath Bombs: 18.18 %
Body Lotion: 18.18%Body Scrub: 18.18 %Candles: 100%
Perfume: 15.31%Deodorant: 3.64%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$24.20
Turquoise® by Brambleberry Type

You’ll love the sophisticated mix of bergamot, lemon, jasmine, rose, patchouli, and amber in this scent. 

* Compare our fragrance to Turquoise® by BrambleBerry.


Flashpoint:  199° F
Vanilla Content:  5.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candles


IFRA Maximum Skin Exposure Levels:

Soap: 3.75%Body Wash: 3.75%Bath Bombs: 3.75%
Body Lotion: 9.75%Body Scrub: 3.75%Candles: 100%
Perfume: 25.05%Deodorant: 6.25%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 

Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with BrambleBerry.

$27.20
Vanilla Birch BBW Type

Description:  Embark on an aromatic journey through a woodland wonderland. This scent evokes the sweetness of nature's embrace, with hints of white birch bark, the allure of Madagascar vanilla, and the grounding essence of sandalwood. It's like taking a leisurely walk through a fragrant forest grove.

* Compare our fragrance to Vanilla Birch® by Bath + Bodyworks.



Flashpoint:  197° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 8.78%Body Wash: 8.78%Bath Bombs: 8.78%
Body Lotion: 14.86%Body Scrub: 8.78%Candles: 100%
Perfume: 28.37%Deodorant: 10.81%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Bath + Bodyworks.

$17.10
Vanilla Santal and Shea Butter Wooden Wick Type
Description: A warm combination of vanilla, sexy sandalwood and sweet nutty shea butter.

* Compare our fragrance to Vanilla Santal and Shea Butter® by Wooden Wick.


Flashpoint: >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

Soap: 28.24%Body Wash: 28.24%Bath Bombs: 28.24%
Body Lotion: 32.00%Body Scrub: 28.24%Candles: 100%
Perfume: 83.48%Deodorant: 7.00%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

$25.20
Volcano Capri Blue Type

A vibrant fragrance that illustrates invigorating notes of tropical fruits, crisp lemon, lime and exotic greens.

* Compare our fragrance to Volcano® by Capri Blue.


Flashpoint: >200° F
Vanilla Content:  15.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 10.00%Body Wash: 10.00%Bath Bombs: 10.00%
Body Lotion: 10.00%Body Scrub: 10.00%Candles: 100%
Perfume: 10.00%Deodorant: 2.00%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Capri Blue.

$23.20
Warm Pipe Tobacco® DH Home Type

Super Manly!  Warm Tobacco and brushed suede are combined with woody greens, smoky leather and patchouli. 

* Compare our fragrance to Warm Tobacco® by DH Home.



Flashpoint:  >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 4.54%Body Wash: 4.54%Bath Bombs: 4.54%
Body Lotion: 4.41%Body Scrub: 4.54%Candles: 100%
Perfume: 17.24%Deodorant: 0.96%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with DH Home.

$28.20
Watermelon Peak Type

Talk about a perfect watermelon!!! This is it - the one you've been looking for. A best seller for so many of my customers! Formulated for candles but skin safe up to 0.39%.

* Compare our fragrance to Watermelon® dupe by Peak Candle.

* GROUND SHIP ONLY



Flashpoint:  150° F
Vanilla Content:  2.50 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 1.11 %Body Wash: 1.11 %Bath Bombs: 1.11 %
Body Lotion: 0.39 %Body Scrub: 1.11 %Candles: 100%
Perfume: 0.39 %Deodorant: 0.39 %Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$22.20
Welcome Home BBW Type

Description:  Blend of wood chips, pine needles & vanilla beans enhanced by cinnamon bark, green apple & mint leaves on a dry down of powdery musk.

* Compare our fragrance to Welcome Home® by Bath & Body Works.



Flashpoint:  168° F
Vanilla Content:  9.50%
Country of Origin: USA
Phthalate Content: NOT Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 2.50%Body Wash: 2.50%Bath Bombs: 2.50%
Body Lotion:2.50%Body Scrub: 2.50%Candles: 100%
Perfume:2.50%Deodorant:2.50%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$26.20
Wild Huckleberry® BBW Type

A charming blend of juicy huckleberry, black currant, fresh green leaves, and musky vanilla notes.

* Compare our fragrance to Wild Huckleberry® by Bath & Body Works.



Flashpoint:  181° F
Vanilla Content:  0.38 %
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 6.67%Body Wash: 6.67%Bath Bombs: 6.67%
Body Lotion: 6.67%Body Scrub: 6.67%Candles: 100%
Perfume: 6.67%Deodorant: 1.33%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$25.20
Winter Candy Apple BBW Type

Winter Candy Apple is a cheerful blend of ruby red apple, winter rose petals and candied orange, drizzled with crisp maple and cinnamon. Scrumptious all year round!

* Compare our fragrance to Winter Candy Apple® by Bath and Body Works.


Flashpoint: >200° F
Vanilla Content:  3.20%
Country of Origin: USA
Phthalate Content: Phthalate Free
Skin Safe: 
Yes
Oil Color: 
Pale Yellow
Formulated For: 
Soap / Candle
Essential Oils In Fragrance: 
Orange

Top Notes:  Apple, Orange Zest
Middle Notes:  Maple, Neroli, Cinnamon, Rose
Bottom Notes:  Musk, Oakmoss

IFRA SHEET

IFRA Maximum Skin Exposure Levels:

Soap: 10.71%Body Wash: 10.71%Bath Bombs: 10.71%
Body Lotion: 15.62%Body Scrub: 10.71%Candles: 100%
Perfume: 50.00%Deodorant: 3.31%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Bath and Body Works.

$24.20
Per Page      91 - 120 of 120