Limited Editions

Did you miss out on one of our Facebook Group buys?

You're in luck!! All of these fragrances were brought in by our SSS - ISO Facebook group and are Limited Editions. Once they're gone we won't bring them in again until another group buy opens up.
Sort By:  
Dreft Stage 2 Active Baby® by Dreft

This is a duplicate of the Dreft Stage 2 Active Baby scent. While we can't find an actual fragrance description - we can tell it's fresh and somewhat apply.

* Compare our fragrance to Dreft Stage 2 Active Baby® by Dreft.



Flashpoint:  >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 9.28%Body Wash: 9.28%Bath Bombs: 9.28%
Body Lotion: 3.22%Body Scrub: 9.28%Candles: 100%
Perfume: 17.20%Deodorant: 0.92%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Dreft.

$28.69
Dried Florals and Incense Wooden Wick Type

Description:  Spicy notes mix with smoky and floral notes in this fragrance accord.

* Compare our fragrance to Dried Florals and Incense® by Wooden Wick.


Flashpoint: TBDF
Vanilla Content:  TBD%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle


IFRA Maximum Skin Exposure Levels:

Soap: 12.06%Body Wash: 12.06%Bath Bombs: 12.06%
Body Lotion: TBD%Body Scrub: 12.06%Candles: 100%
Perfume: TBD%Deodorant: TBD%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

$26.69
Driftwood and Juniper by Wooden Wick Type

Description:  This unique combination of tobacco and incense is intertwined with the scent of the ocean and the floral and fern notes from the Mediterranean region.

* Compare our fragrance to Driftwood and Juniper® by Wooden Wick.


Flashpoint: TBDF
Vanilla Content:  TBD%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle


IFRA Maximum Skin Exposure Levels:

Soap: 8.33%Body Wash: 8.33%Bath Bombs: 8.33%
Body Lotion: TBD%Body Scrub: 8.33%Candles: 100%
Perfume: TBD%Deodorant: TBD%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

$21.69
Driftwood by Natures Items Type

Gnarly drift wood washed to shore and drying in the warm sun and salty sea air. Woody notes mingle with earthy and fresh salty air.

* Compare our fragrance to Driftwood by Natures Items.


Flashpoint: > ° F
Vanilla Content:  %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: %Body Wash: %Bath Bombs: %
Body Lotion: %Body Scrub: %Candles: 100%
Perfume: %Deodorant: %Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Natures Items.

$24.69
F**cking Fabulous Tom Ford Type

F**cking Fabulous is just that...it's probably the most perfect description of a fragrance I've ever heard! It made it's debut during New York Fashion Week in 2017 and it's been popular ever since. Retailing for $335 for 1.7 fl oz of perfume - it's definitely one you'll want in your arsenal!

Description: Sephora says this fragrance is "explicit, exclusive, and fabulous, this oriental artisanal scent features spices and warm and sweet gourmands."

* Compare our fragrance to Fucking Fabulous by Tom Ford.

Notes: 
Lavender, Sage, Bitter Almond, Tonka Beans, Leather, Cashmere and Amber. The essential oils used to make this dupe include Amyris, Chamomile and Patchouli.


Flashpoint:  >200° F
Vanilla Content:  0.12%
Country of Origin: USA
Phthalates: Phthalate Free
Formulate For:  Fine Fragrance / Body Oil



IFRA Maximum Skin Exposure Levels:

Soap: 12.50%Body Wash: 12.50%Bath Bombs: 12.50%
Body Lotion: 12.50%Body Scrub: 12.50%Candles: 100%
Perfume: 12.50%Deodorant: 3.75%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Tom Ford.

$28.69
Febreze Air Wood by Febreze Type

Description from Febreze: Notes of oud, amber, and cedar create an ambience of craftsmanship and nature.

* Compare our fragrance to Febreze Air Wood® by Febreze.


Flashpoint: TBD° F
Vanilla Content:  TBD%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle


IFRA Maximum Skin Exposure Levels:

Soap: TBD%Body Wash: TBD%Bath Bombs: TBD%
Body Lotion: TBD%Body Scrub: TBD%Candles: 100%
Perfume: TBD%Deodorant: TBD%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Febreze.

$32.69
French Cade Lavender by Voluspa Type

THE SCENT OF A EUROPEAN GARDEN AFTER A SPRING RAIN. FRENCH LAVENDER AND A LIGHT TOUCH A CADE WOOD COMBINE FOR THIS UNUSUAL SCENT.


This is an untested fragrance being brought in by our SSS - ISO Group.

* Compare our fragrance to French Cade Lavender® by Voluspa


Flashpoint: >200 ° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 48.64%Body Wash: 48.64%Bath Bombs: 48.64%
Body Lotion: 19.46%Body Scrub: 48.64%Candles: 100%
Perfume: 11.67%Deodorant: 3.89%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Voluspa.

$12.00
Fresh Shave by Manly Indulgence Type
Description: Experience the clean & fresh scent of a well groomed man with a fresh shave. A crisp yet woodsy fragrance invigorates the senses.

* Compare our fragrance to Fresh Shave® by Manly Indulgence.


Flashpoint: 181° F
Vanilla Content:  2.20%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

Soap: 6.21%Body Wash: 6.21%Bath Bombs: 6.21%
Body Lotion: 11.76%Body Scrub: 6.21%Candles: 100%
Perfume: 11.76%Deodorant: 1.18%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Manly Indulgence.

$27.69
Fresh Sparkling Snow BBW Type

Description:  ORANGE ZEST, MELON BALLS AND WILD BERRIES WITH A HINT OF EXOTIC MUSK.

* Compare our fragrance to Fresh Sparkling Snow® by Bath & Body Works.



Flashpoint:  198° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 100%Body Wash: 100%Bath Bombs: 100%
Body Lotion: 100%Body Scrub: 100%Candles: 100%
Perfume: 100%Deodorant: 22.61%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$24.69
Frosted Coconut Snowball BBW Type

Description:  Mouthwatering toasted coconut with sweet vanilla and whipped cream

* Compare our fragrance to Frosted Coconut Snowball® by Bath & Body Works.



Flashpoint:  181° F
Vanilla Content:  0.86%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated for:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 50.00%Body Wash: 50.00%Bath Bombs: 50.00%
Body Lotion: 25.45%Body Scrub: 50.00%Candles: 100%
Perfume: 16.36%Deodorant: 3.94%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$22.69
Frozen Lake White Barn Type

A refreshing blend of juniper, eucalyptus and lavender make for a relaxing aroma that is fresh and clean.

* Compare our fragrance to Frozen Lake® by White Barn.



Flashpoint:  > 200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 30.30%Body Wash: 30.30%Bath Bombs: 30.30%
Body Lotion: 13.51%Body Scrub: 30.30%Candles: 100%
Perfume: 8.11%Deodorant: 2.70%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with White Barn.

$25.69
Gabrielle by Chanel Type

An intriguing and feminine fragrance composed of a bouquet of four white flowers. Jasmine richly glistens with sweet green notes of Ylang-ylang and Orange Blossom before revealing hints of Grasse Tuberose.

* Compare our fragrance to Gabrielle® by Chanel.


Flashpoint: 194° F
Vanilla Content:  0.10%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Fine Fragrance / Body Oil



IFRA Maximum Skin Exposure Levels:

Soap: 28.57%Body Wash: 28.57%Bath Bombs: 28.57%
Body Lotion: 28.57%Body Scrub: 28.57%Candles: 100%
Perfume: 28.57%Deodorant: 5.71%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Chanel.

$31.69
Goji Berry and Hemp® Wooden Wick Type
Ripe goji berries intertwine with pear and plum on a base of hemp leaves, patchouli and amber.

* Compare our fragrance to Goji Berry and Hemp® by Wooden Wick.


Flashpoint: >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

Soap: 25.95%Body Wash: 25.95%Bath Bombs: 25.95%
Body Lotion: 10.80%Body Scrub: 25.95%Candles: 100%
Perfume: 4.43%Deodorant: 2.28%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

$28.69
Goji Tarocco Orange by Voluspa Type

UNIQUE, TROPICAL AND REFRESHING. THIS SLIGHTLY TART BLEND, COMBINES THE EXOTIC AROMA OF ORANGES WITH WHISPERS OF EXOTIC FLOWERS.


* Compare our fragrance to Goji Tarocco Orange® by Voluspa


Flashpoint: 184° F
Vanilla Content:  0.06%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 100%Body Wash: 100%Bath Bombs: 100%
Body Lotion: 100%Body Scrub: 100%Candles: 100%
Perfume: 100%Deodorant: 26.63%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Voluspa.

$24.69
Golden Santal® Pier 1 Imports Type

A truly exotic blend! This is a duplicate of the discontinued Pier 1 scent. This seductive fragrance combines notes of sandalwood and santal to create this unusual fragrance.


This is an untested fragrance.

* Compare our fragrance to Golden Santal® by Pier 1 Imports.


Flashpoint: >200 ° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 4.20%Body Wash: 4.20%Bath Bombs: 4.20%
Body Lotion: 8.92%Body Scrub: 4.20%Candles: 100%
Perfume: 23.08%Deodorant: 1.92%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Pier 1 Imports.

$22.69
Grapefruit and Gardenia® Wooden Wick Type
A beautiful blend of tart, succulent grapefruit with the intoxicating scent of gardenia flowers.

* Compare our fragrance to Grapefruit and Gardenia® by Wooden Wick.


Flashpoint: 191° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

Soap: 10.34%Body Wash: 10.34%Bath Bombs: 10.34%
Body Lotion: 2.71%Body Scrub: 10.34%Candles: 100%
Perfume: 2.34%Deodorant: 0.57%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

$28.69
Guilty for Women by Gucci

The rosy nuances of pink pepper, sweet orange and crisp bergamot intertwine with delicate lilac, succulent peach, rosy geranium, sweet jasmine and bracing yet tangy black currant. Minty patchouli, golden amber, creamy vanilla and warm musk blend harmoniously together to unite and enhance this fragrant accord.


* Compare our fragrance to Guilty® by Gucci.


Flashpoint: 200° F
Vanilla Content:  0.46%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Fine Fragrance / Body Oil



IFRA Maximum Skin Exposure Levels:

Soap: 10.00%Body Wash: 10.00%Bath Bombs: 10.00%
Body Lotion: 10.00%Body Scrub: 10.00%Candles: 100%
Perfume: 10.00%Deodorant: 2.00%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Gucci.

$27.69
Gypsy Water by Byredo Type

A seductive, unisex fragrance which reveals an opening of bergamot, lemon, pepper, and juniper. At its heart, it reveals incense, pine needles, and orris root before showcasing warm amber, vanilla, and sandalwood at its base.

* Compare our fragrance to Gypsy Water® by Byredo Type.


Flashpoint: >200 ° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Candle / Soap



IFRA Maximum Skin Exposure Levels:

Soap: 16.06%Body Wash: 16.06%Bath Bombs: 16.06%
Body Lotion: 0.08%Body Scrub: 16.06%Candles: 100%
Perfume: 0.08%Deodorant: 0.08%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Byredo.

$30.69
Heat by Beyonce Type

This is a sweet floral wth infused notes of red vanilla orchid blended with honeysuckle and almond.This blends harmoniously with base notes of creamy musk, sequioa wood, tonka bean and amber.

* Compare our fragrance to Heat® by Beyonce.


Flashpoint: > 200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Fine Fragrance / Body Oil



IFRA Maximum Skin Exposure Levels:

Soap: 11.76%Body Wash: 11.76%Bath Bombs: 11.76%
Body Lotion: 0.25%Body Scrub: 11.76%Candles: 100%
Perfume: 0.25%Deodorant: 0.25%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Beyonce.

$23.69
Holiday BBW Type

Description:  A delightful mixture of nutmeg, clove, and cinnamon makes a warming blend of holiday spices.

* Compare our fragrance to Holiday® by Bath & Body Works.



Flashpoint:  181° F
Vanilla Content:  0.18%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 6.51%Body Wash: 6.51%Bath Bombs: 6.51%
Body Lotion: 0.23%Body Scrub: 6.51%Candles: 100%
Perfume: 0.23%Deodorant: 0.23%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$20.69
Holiday Sparkle Peak Candle Type

Description:  A magical holiday fragrance that glistens with fresh blue spruce, tart apple cider, juicy cranberry, and sweet plum top notes. Enchanting and intoxicating.

* Compare our fragrance to Holiday Sparkle® by Peak Candle.



Flashpoint:  >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 2.38%Body Wash: 2.38%Bath Bombs: 2.38%
Body Lotion: 0.01%Body Scrub: 2.38%Candles: 100%
Perfume: 0.01%Deodorant: 0.01%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candle.

$21.69
Hot Cocoa and Cream BBW Type

Description:  This fragrant accord permeates the atmosphere reminiscent of pouring hot cocoa into a mug of hot-steamed milk and stirring in the mini marshmallows that instantly melt down into creamy, frothy, bubbles that pleasantly captures this warming wintery moment.

 

* Compare our fragrance to Hot Cocoa and Cream® by Bath & Body Works.



Flashpoint:  >200° F
Vanilla Content:  15.00%
Country of Origin: USA
Phthalate Content: NOT Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 27.65%Body Wash: 27.65%Bath Bombs: 27.65%
Body Lotion: 19.44%Body Scrub: 27.65%Candles: 100%
Perfume: 12.50%Deodorant: 2.78%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$21.69
Into The Night BBW Type

Description: A timeless, feminine, alluring blend of dark berries, midnight jasmine & rich amber

 

* Compare our fragrance to Into The Night® by Bath and Bodyworks.


Flashpoint:  >200° F
Vanilla Content:  0.64%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:23.81

Soaps: 6.00%Body Wash: 6.00%Bath Bombs: 6.00%
Body Lotion: 15.60%Body Scrub: 6.00%Candles: 100%
Perfume: 1.56%Deodorant: 3.83%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Bodyworks.

$24.69
Juniper Breeze BBW Type

Description:  FLORAL BOUQUET OF JASMINE, ROSE, VIOLET AND LILY OF THE VALLEY WITH A FRESH OZONE TONE ON A BACKGROUND OF LIGHT MUSK AND WOODS.

* Compare our fragrance to Juniper Breeze® by Bath and Body Works.


Flashpoint: 193 F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

Soap: 36.66%Body Wash: 36.66%Bath Bombs: 36.66%
Body Lotion: 14.66%Body Scrub: 36.66%Candles: 100%
Perfume: 8.80%Deodorant: 2.93%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$23.69
Juniper Fir and Balsam Spruce Wooden Wick Type
This SUPER STRONG fragrance intertwines fresh juniper fir with fragrance balsam spruce. Smells like the holidays!

* Compare our fragrance to Juniper Fir + Balsam Spruce® by Wooden Wick.


Flashpoint: 191° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

Soap: 61.48%Body Wash: 61.48%Bath Bombs: 61.48%
Body Lotion: 27.29%Body Scrub: 61.48%Candles: 100%
Perfume: 100%Deodorant: 5.97%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Wooden Wick.

$22.69
Kitchen Lemon BBW Type

Description:  Fresh, zesty lemon with sparks of bergamot perfect for an everyday bright, clean fragrance.

* Compare our fragrance to Kitchen Lemon® by Bath & Body Works.



Flashpoint:  181° F
Vanilla Content:  0.38%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 77.64%Body Wash: 77.64%Bath Bombs: 77.64%
Body Lotion: 0.21%Body Scrub: 77.64%Candles: 100%
Perfume: 0.21%Deodorant: 0.21%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$19.69
Labdanum and Cashmere Musk Wooden Wick Type

Description:  Sexy and clean! This combination of lemon zing intertwine with warm amber and fragrant balsam in this fragrance accord.

* Compare our fragrance to Labdanum and Cashmere Musk® by Wooden Wick.


Flashpoint: 194 F
Vanilla Content:  TBD%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps / Candles


IFRA Maximum Skin Exposure Levels:

Soap: 14.12%Body Wash: 14.12%Bath Bombs: 14.12%
Body Lotion: TBD%Body Scrub: 14.12%Candles: 100%
Perfume: TBD%Deodorant: TBD%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

$28.69
Lavender Sea® BBW Type
A compelling soothing fragrance infused with wonderful lavender, coconut water, and creamy vanilla. Relaxing and inviting.

* Compare our fragrance to Lavender Sea® by Bath & Bodyworks.


Flashpoint:  >200° F
Vanilla Content:  0.12%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 41.67%Body Wash: 41.67%Bath Bombs: 41.67%
Body Lotion: 66.67%Body Scrub: 41.67%Candles: 100%
Perfume: 41.67%Deodorant: 10.83%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Bath & Bodyworks.

$23.69
Leaves BBW Type

This colorful contrast palet entwines the old with the new. Sweet leaf greens, fresh pines, dewy spiced florals, and earthen musk.


* Compare our fragrance to Leaves by Bath & Bodyworks.

Flashpoint: 196° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 11.52%Body Wash: 11.52%Bath Bombs: 11.52%
Body Lotion: 0.15%Body Scrub: 11.52%Candles: 100%
Perfume: 0.15%Deodorant: 0.15%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Bodyworks.

$22.69
Legend® Mont Blanc Type

Description:  Succulent pineapple, clean lavender, crisp bergamot and sweet lemon verbena intertwine with delicious red apple notes, dried fruits, forest-like oakmoss, rosy geranium and beautiful rose blooms. Desert sandalwood and spicy tonka bean blend together to enhance and complete this fragrant accord. 

* Compare our fragrance to Legend® by Mont Blanc.


Flashpoint: >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Fine Fragrance / Body Oil

IFRA Maximum Skin Exposure Levels:

Soap: 7.69%Body Wash: 7.69%Bath Bombs: 7.69%
Body Lotion: 7.69%Body Scrub: 7.69%Candles: 100%
Perfume: 7.69%Deodorant: 1.54%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Mont Blanc.

$30.69
Per Page      31 - 60 of 121