Fragrance Oils

In a blind smell test, my 10 year old could tell this was fruit loops - it's truly SPOT ON!!! Just like the cereal you'll smell sweet orange and tangy cherry. No acceleration or ricing. Slight discoloration but can be fixed with either mica or titanium dioxide.

* Compare our fragrance to Froot Loops® by Kellogg.

Flashpoint: 167° F
Vanilla Content:  2.00 %
Country of Origin: USA
Phthalates: Not Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Kellogg.

Your favorite fragrance from the 90's has been brought back by Bath and Bodyworks by popular demand. This fine fragrance is going to be a BEST SELLER for our customers for sure!  

SUPER STRONG!! A fresh blend of bright florals & a touch of sweet citrus. It has note of sweet clementine, soft violet petals and blue freesia. Intoxicating!

* Compare our fragrance to Gingham fine fragrance by Bath and Bodyworks.


Flashpoint: 181 F 
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Bodyworks.

A truly exotic blend! This is a duplicate of the discontinued Pier 1 scent. This seductive fragrance combines notes of sandalwood and santal to create this unusual fragrance.


This is an untested fragrance.

* Compare our fragrance to Golden Santal® by Pier 1 Imports.

Flashpoint: >200 ° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Pier 1 Imports.

* Compare our fragrance to Grapefruit and Gardenia® by Wooden Wick.

Flashpoint: 191° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

Think Spring with this clean, green scent! Crisp green notes intertwine with wild herbs and spring flowers with a light musk/woody background.

*Compare to Green Clover and Aloe by Bath and Body Works*

Flashpoint: > 200° F
Vanilla Content:  0.30 %
Country of Origin: USA
Phthalates: Phthalate Free
Skin Safe:  Yes
Oil Color:  Clear
Formulated For:  Soaps | Candles
Essential Oils in Fragrance:  None

Top Notes:  Citrus
Middle Notes:  Floral
Bottom Notes:  Musk, Wood

IFRA SHEET

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Bath and Body Works.

Smells just like sipping on a peachy, sparkling drink while sitting next to a bouquet of honeysuckle. So warm and yummy!

* Compare our fragrance to Honeysuckle + Peach Spritz® by Bath and Body Works.

Flashpoint: >200° F
Vanilla Content:  0.10%
Country of Origin: USA
Phthalate Content: Phthalate Free
Skin Safe:  Yes
Oil Color:  Pale Yellow
Formulated For:  Soap / Candle
Essential Oils In Fragrance:  California Lemon, Italian Bergamot 

Top Notes:  Peach
Middle Notes:  Fresh Orange Zest, Bergamot
Bottom Notes:  Honeysuckle

IFRA SHEET

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Bath and Body Works.

This mouthwatering fragrance will make you wish it was edible! A sweet creamy chocolate fudge intertwined with velvety vanilla bean ice cream and topped with a rich dollop of whipped cream.

This is an untested fragrance.

* Compare our fragrance to Hot Fudge Sundae® by Bath & Body Works.

Flashpoint:  181° F
Vanilla Content:  5.36 %
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

Plump sugared blueberries are mixed with almond biscotti, brown sugar and sweet vanilla icing. Yummy!

* Compare our fragrance to Iced Blueberry Biscotti® by Bath and Body Works.

Flashpoint: >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Skin Safe:  Yes
Oil Color:  Pale Yellow
Formulated For:  Soap / Candle
Essential Oils In Fragrance:  Orange

IFRA SHEET

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Bath and Body Works.

Description: A timeless, feminine, alluring blend of dark berries, midnight jasmine & rich amber

* Compare our fragrance to Into The Night® by Bath and Bodyworks.


Flashpoint:  >200° F
Vanilla Content:  0.64%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:23.81

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Bodyworks.

Out of the bottle I give this a 9 out of 10. Smells exactly like the BBW fragrance. Definitely a very delicate feel from this one. No ricing and slight discoloration but boy did it accelerate! I expected that because it is a floral based fragrance. Still, smells beautiful! BBW uses this scent in just about EVERYTHING. So, this would be prefect for soaps, lotions, scrubs, bombs, candles...you name it!

* Compare our fragrance to Japanese Cherry Blossom® by Bath and Body Works.

Flashpoint: > 200° F
Vanilla Content:  0.52 %
Country of Origin: USA
Phthalates: Not Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

One of the best dupes I've smelled! This is a DEAD RINGER for the Juicy Fruit gum that I remember chewing as a kid! Strong and true. Ships in a safe, PET bottle.

* Compare our fragrance to Juicy Fruit® by Wrigley.

Flashpoint: 187° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wrigley.

* Compare our fragrance to Juniper Fir + Balsam Spruce® by Wooden Wick.

Flashpoint: 191° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Wooden Wick.

Spicy, citrusy and distinctly unique, Karma is the signature scent of Lush. Patchouli, sweet orange and lemongrass oils combine to create a scent that is both warm, and enticing.

* Compare our fragrance to Karma® by LUSH.

Flashpoint: > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with LUSH.

Description:  Fresh, zesty lemon with sparks of bergamot perfect for an everyday bright, clean fragrance.

* Compare our fragrance to Kitchen Lemon® by Bath & Body Works.

Flashpoint:  181° F
Vanilla Content:  0.38%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

Description:  Sexy and clean! This combination of lemon zing intertwine with warm amber and fragrant balsam in this fragrance accord.

* Compare our fragrance to Labdanum and Cashmere Musk® by Wooden Wick.

Flashpoint: 194 F
Vanilla Content:  TBD%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps / Candles


IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

Description:  Smells just like freshly washed laundry pulled out of the dryer. So comforting and cozy!

* Compare our fragrance to Laundry Day® by Bath and Body Works.

Flashpoint: 181° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Skin Safe:  Yes
Oil Color:  Pale Yellow
Formulated For:  Soap / Candle
Essential Oils In Fragrance:  Florida Orange Oil

Top Notes:  Fresh Air
Middle Notes:  Eucalyptus
Bottom Notes:  Lavender

IFRA SHEET

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance



It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Bath and Body Works.

The true scent of lavender without the essential oil price. 


Flashpoint: > 186° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

This fresh, lavender filled bouquet begins with top notes of watery cucumber and smooth sage. Soothing and relaxing and very spa like!

* Compare our fragrance to discontinued Lavender Sage & Cucumber by Candle Science.

Flashpoint:  >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Candle Science.

Description:  A tranquil and calming blend of warm vanilla and soothing lavender sure to aid in peaceful sleep.

* Compare our fragrance to Lavender Vanilla® by Bath and Bodyworks.

Flashpoint:  >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Skin Safe:  Yes
Oil Color:  Pale Yellow
Formulated For:  Soap / Candle
Essential Oils In Fragrance:  Lavender

Top Notes:  Floral
Middle Notes:  Lavender
Bottom Notes:  Vanilla

IFRA SHEET

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Bath and Bodyworks.

Description from Rustic Escentuals: A traditional Lemon Curd is a staple in afternoon English tea and is used as a delicate spread on finger cakes, sugar dusted scones, and tarts. Our rendition of this classic combines fresh, zesty lemons, warm vanilla extract and a hint of sugar blended with fresh cream. It's a refreshing and mouthwatering blend of tart and creaminess.

* Compare our fragrance to Lemon Curd® by Rustic Escentuals.

Flashpoint:   150 F
Vanilla Content: 2.40%
Country of Origin: USA
Phthalate Content: Not Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Rustic Escentuals.

Description:  Refreshing lemon grass and clearing & clean eucalyptus scents intertwine together with spicy ginger and fragrant thyme scents, Resinous cedarwood and aromatic sage notes blend together to enhance and complete this fragrant accord. 

* Compare our fragrance to Lemongrass and Ginger® by Nest.

Flashpoint: >200° F
Vanilla Content:  0.20%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Nest.

* Compare our fragrance to Luna® by Scentsy.

Flashpoint: >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle


IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Victoria's Secret.

The most spot-on apple scent that I've ever smelled! We go apple picking every year and this is the exact scent of the bottom of a Macintosh apple fresh picked from the tree. Super apple!!! Holds great in soaps - no discoloration, ricing or acceleration.

* Compare our fragrance to Macintosh Apple® by Yankee Candle.

Flashpoint: 194° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Not Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Yankee Candle.

Strong and yummy! Luscious tones of fruit are blended with warm spicy tones in this tempting creation. Bright citrus notes of tangerine balance with fresh cherry for the tangy top note. A heart of ripe peach mingles with strawberry, as hints of spice add delightful texture.

* Compare our fragrance to Yankee Candle's Mango Peach Salsa®.


Flashpoint: > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Not Phthalate Free

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Yankee Candle.

* Compare our fragrance to Marigold + Cedar Musk® by Makesy.

Flashpoint: >200° F
Vanilla Content:  1.16%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Makesy.

Description:  A delightfully sweet aroma that combines pumpkin spiced latte and toasty marshmallows with creamy sandalwood and sweet musk to produce a decadent, warm aroma..

* Compare our fragrance to Marshmallow Pumpkin Latte® by Bath & Body Works.

Flashpoint:  181° F
Vanilla Content:  12.50%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

Fresh tropical citrus notes intertwine with the refreshing water based notes of a tropical midnight sea scape. Warm, soft musk  unites to enhance this amazing scent.

* Compare our fragrance to Midnight Blue Citrus® by Bath & Body Works.

Flashpoint:  189° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Skin Safe:  Yes
Oil Color:  Pale Yellow
Formulated For:  Soap / Candle
Essential Oils In Fragrance:  None

Top Notes:  Citrus, Tropical Fruit
Middle Notes:  Water, Ozone
Bottom Notes:  Musk

IFRA SHEET

IFRA Maximum Skin Exposure Levels:

INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Bath and Body Works.

A LIGHT, CLEAN UNIQUE SCENT WITH A TART LEMON OPENING. A HEART OF ORCHIDS, JASMINE AND WHITE LILYS MELT INTO A SOFT, YET WARM COMBINATION OF SANDALWOOD AND MUSK.


This is an untested fragrance being brought in by our SSS - ISO Group.

* Compare our fragrance to Mokara® by Voluspa

Flashpoint: >200 ° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Voluspa.

This sensual woody blend combines sandalwood, Western cedar, oak and spruce with a hint of spice for a warm sensation. Exotic patchouli adds a rich earthy tone while balsamic undertones fortify the woody signature. Warm, sweet amber surrounds it all, giving the blend a luxurious finish.

Flashpoint:  >200° F
Vanilla Content:  1.33%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap and Candle

IFRA Maximum Skin Exposure Levels:

INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

November Rain by Yankee Candle captures the crisp essence of autumn showers. Fresh rainfall melds with earthy undercurrents, evoking the sensation of misty woods and fallen leaves. A calming and rejuvenating scent, it's a serene embrace of nature's transition, perfect for cozy moments and introspection.

* Compare our fragrance to November Rain by Yankee Candle.


Flashpoint: > 200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Yankee Candle.

It's a strong and perfect blend of these three amazing scents! Sweet honey mixed with creamy milk and soothing oatmeal. Sweet and toasted! Discolors to tan in CP. No ricing or acceleration.


Flashpoint: > 200° F
Vanilla Content:  0.46 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

This one is gonna tickle your nose and delight your senses! Fizzy bubbles are coupled with a delicious blend of lime and mandarin orange. Warm notes merge with cloves and cinnamon with hints of vanilla. Spicy ginger rounds out this amazing fragrance. It's a tall glass of fizzy goodness! Made for candles but skin safe up to .02%.

* Compare our fragrance to Orange Ginger Fizz® by Peak Candle.

Flashpoint: 190° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Not Phthalate Free
Formulated For:  Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

* Compare our fragrance to Orchid and Black Amber® by Wooden Wick.

Flashpoint: >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

Indulge in the scent of Central and South American “holy wood”. Brand new for 2018 from White Barn Candle. Use by saints and shamans alike for centuries to uplift energy and help with spiritual purification. A sweet but very mild sage, vanilla, mint, citrus and cedar scent which is closely related to frankincense. It’s a stress relieving, calming scent which many use before meditation to clear the mind and sharpen focus. Palo Santo White Barn Candle Type is a molecular clone of the scent sold by Bath and Body Works.

* Compare our fragrance to Palo Santo by Bath & Bodyworks.

Flashpoint: > 200° F
Vanilla Content:  0.50%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Bodyworks.

Description:  The tantalizing aroma of fresh made jam with toasted peanutty bread, rounded out with a sweet drizzle of honey.

* Compare our fragrance to PB & J® by Bath and Body Works.

Flashpoint: >200° F
Vanilla Content:  0.46%
Country of Origin: USA
Phthalate Content: Phthalate Free
Skin Safe:  Yes
Oil Color:  Pale Yellow
Formulated For:  Soap / Candle
Essential Oils In Fragrance:  None

Top Notes:  Fresh Jam
Middle Notes:  Peanut Butter, Toasted Bread, Coconut
Bottom Notes:  Vanilla, Honey, Sweet Musk

IFRA SHEET

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance



It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Bath and Body Works.

This beautiful Jo Malone dupe is like taking a juicy bite out of a red apple followed by hints of red roses, carnations and wild jasmine. A sexy blend of musk, suede and woods rounds out this scent. 

* Compare our fragrance to Peony and Blush Suede® by Jo Malone.

Flashpoint:  >200° F
Vanilla Content:  0.40%
Country of Origin: USA
Phthalate Content: Phthalate Free
Skin Safe:  Yes
Oil Color:  Pale Yellow
Formulated For:  Soap / Candle
Essential Oils In Fragrance:  Patchouli

Top Notes:  Light Apple
Middle Notes:  Rose, Carnation, Jasmine
Bottom Notes:  Musk, Suede, Wood

IFRA SHEET

IFRA Maximum Skin Exposure Levels:

INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Jo Malone.

Peppered Suede candle feels like a soft, fuzzy throw blanket or a warm hug -- the scent is so comforting and inviting. Lavender and bergamot are a winning combo for creating a relaxing setting, while amberwood and black pepper add spicy, smoky notes.

This is an untested fragrance. 

* Compare our fragrance to Peppered Suede® by Bath & Body Works.

Flashpoint:  >200° F
Vanilla Content:  0.02 %
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

* Compare our fragrance to Petals and Herbs® by Wooden Wick.

Flashpoint: >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

A wise woman once told me that the smell would change my life. And...it did!! This scent is a tropical treat! Fresh Island pineapple served with a citrus touch of cilantro and sweet coconut. Moderate acceleration, discolors to a brown due to the vanillin content. You will need a color stabilizer with this one. No ricing.

* Compare our fragrance to Yankee Candle's Pineapple Cilantro®.


Flashpoint: 178° F
Vanilla Content:  8.87 %
Country of Origin: USA
Phthalates: Not Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Yankee Candle.

Description:  Sweet and juicy pink lady apples, spicy cinnamon and honey intermingle with fruit punch having hints of succulent peach. Subtly sweet nutmeg and watery melon harmoniously blend with warm musk, creamy vanilla, the tropical scent of coconut and sweet caramel to unite and enhance this fresh,gourmand fragrance.

* Compare our fragrance to Pink Apple Punch® by Bath & Body Works.

Flashpoint:  180° F
Vanilla Content:  0.38%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.