Fragrance Oils

All of our fragrance oils listed below have been tested/approved for use in cold process and hot process soap making. We list any discoloration, acceleration or ricing noted during our testing under each individual item. All are strong fragrances that will stick through saponification.
Sort By:  
$26.20
$27.20
$12.10
$27.20
$24.20
$24.20
$25.20
$26.20
$28.20
$25.20
$23.20
$30.20
$27.20
$25.20
$26.20
$26.20
$22.20
$28.20
$33.20
$23.20
$23.20
$27.20
$12.60
$12.10
$24.20
$31.20
Avobath LUSH Type

This is a great spa scent! Ideal for rejuvenating morning baths or whenever you seek a touch of inspiration, it offers the perfect boost to uplift your spirits. Super strong. 

* Compare our fragrance to Avobath® by LUSH.


Flashpoint: 183° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 11.49%Body Wash: 11.49%Bath Bombs: 11.49%
Body Lotion: 1.38%Body Scrub: 11.49%Candles: 100%
Perfume: 1.38%Deodorant: 0.11%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with LUSH.

$26.20
Baja Cactus Blossom BBW Type

If you close your eyes you can really smell the blossom and scent of fresh, green cactus on a cool summer night in the desert.

* Compare our fragrance to Baja Cactus Blossom® Bath & Body Works.


Flashpoint: > 200° F
Vanilla Content:  0.97 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 4.44%Body Wash: 4.44%Bath Bombs: 4.44%
Body Lotion: 1.67%Body Scrub: 4.44%Candles: 100%
Perfume: 1.67%Deodorant: 0.89%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Body Works.

$27.20
Balsam and Cedar Yankee Type

This is Yankee Candle's highest selling fragrance year round! It's a wonderful blend of of Balsam, aromatic cedar wood and juniper berry. 

* Compare our fragrance to Yankee Candle's Balsam and Cedar®.



Flashpoint: 182° F
Vanilla Content:  0.08 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 69.46%Body Wash: 69.46%Bath Bombs: 69.46%
Body Lotion: 20.00%Body Scrub: 69.46%Candles: 100%
Perfume: 78.12%Deodorant: 4.37%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Yankee Candle.

$12.10
Beach by Bobbi Brown Type

If you close your eyes you will feel like you are at the beach! A distinctive blend of sun, sand and suntan lotion all rolled into one!  

* Compare our fragrance to Beach® by Bobbi Brown.

Flashpoint: >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Skin Safe:  Yes
Oil Color:  Pale Yellow
Formulated For:  Soap / Candle
Essential Oils In Fragrance:  Lavandin Grosso, Mandarin


Top Notes: Mandarin
Middle Notes:  Rose, Lavender, Geranium
Bottom Notes: Grape, Ozone

IFRA SHEET



IFRA Maximum Skin Exposure Levels:

Soap: 5.95%Body Wash: 5.95%Bath Bombs: 5.95%
Body Lotion: 9.50%Body Scrub: 5.95%Candles: 100%
Perfume: 36.50%Deodorant: 1.95%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bobbi Brown.

$27.20
Beautiful Day BBW Type

Beautiful Day is a BBW best seller and we can see why! It's a playful blend of  Dewy green fresh fruity floral with apple, berries, airy cyclamen, water lily, dew, rose and musk.

* Compare our fragrance to Beautiful Day® Bath & Body Works.


Flashpoint: > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Not Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 16.67%Body Wash: 16.67%Bath Bombs: 16.67%
Body Lotion: 16.67%Body Scrub: 16.67%Candles: 100%
Perfume: 9.60%Deodorant: 1.67%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Body Works.

$25.20
Bedtime Bath Johnson & Johnson Type

Description: A soothing blend of blooming lavender and fresh chamomile. The perfect way to end the day and get a good night's sleep.

* Compare our fragrance to Bedtime Bath® by Johnsons and Johnsons.



Flashpoint:  >200° F
Vanilla Content:  0.15%
Country of Origin: USA
Phthalate Content: CONTAINS PHTHALATES
Formulated For:
  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 5.71%Body Wash: 5.71%Bath Bombs: 5.71%
Body Lotion: 0.30%Body Scrub: 5.71%Candles: 100%
Perfume: 0.30%Deodorant: 0.30%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Johnson's & Johnson's.

$11.60
Berry Vanilla Bean BBW Type

Description: Juicy winter berries intertwined with lush vanilla bean, ruby red pomegranate and a twist of mandarin. 

* Compare our fragrance to Berry Vanilla Bean® by Bath & Body Works.



Flashpoint:  >200° F
Vanilla Content:  5.42%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 2.51%Body Wash: 2.51%Bath Bombs: 2.51%
Body Lotion: 1 09%Body Scrub: 2.51%Candles: 100%
Perfume: 6.34%Deodorant: 1.85%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$23.20
Berrylicious Yankee Type

The cranberry-cherry-tomato nuances of lightly sweet dried goji berries of the Himalayan mountain regions and tangy blackberries intertwine with sweet, savory blueberry tonalities and creamy vanilla scents. These notes blend together to unite, enhance and complete this fragrant accord.


* Compare our fragrance to Berrylicious by Yankee Candle.

Flashpoint:  176° F
Vanilla Content:  2.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 100%Body Wash: 100%Bath Bombs: 100%
Body Lotion: 100%Body Scrub: 100%Candles: 100%
Perfume: 100%Deodorant: 100%Lip:  0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Yankee Candle.

$21.20
Black Cherry Merlot
Black Cherry Merlot BBW Type

Indulge in the rich essence of deep cherry, luscious black raspberry, and velvety merlot, creating a captivating fusion that is perfect for satisfying your desire for something truly luxurious. Sticks great in CP soap.

* Compare our fragrance to Black Cherry Merlot® Bath & Body Works.


Flashpoint: > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candles



IFRA Maximum Skin Exposure Levels:

Soap: 40.00%Body Wash: 40.00%Bath Bombs: 40.00%
Body Lotion: 10.38%Body Scrub: 1.11%Candles: 100%
Perfume: 3.46%Deodorant: 0.77%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Body Works.

$24.20
Black Pepper and Bergamot BBW Type

Description: This is a spicy woody fragrance enhanced with spicy black pepper, bergamot and lavender accords anchored in deep woodsy notes.

* Compare our fragrance to Black Pepper + Bergamot® by Bath & Body Works.



Flashpoint:  >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 32.00%Body Wash: 32.00%Bath Bombs: 32.00%
Body Lotion: 68.00%Body Scrub: 32.00%Candles: 100%
Perfume: 100%Deodorant: 14.66%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Bath and Body Works.

$26.20
Black Raspberry Vanilla BBW Type

Finally! A great smelling black raspberry vanilla fragrance that WILL NOT discolor! Ripe black raspberries are combined with a creamy vanilla musk that really holds it's sent through CP and beyond.

* Compare our fragrance to Black Raspberry Vanilla® by Bath & Body Works.


Flashpoint: 196° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 6.25%Body Wash: 6.25%Bath Bombs: 6.25%
Body Lotion: 0.05%Body Scrub: 6.25%Candles: 100%
Perfume: 0.05%Deodorant: 0.05%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Body Works.

$24.20
Blackberry Magnolia Crafters Choice Type

Indulge in an enchanting fusion of apple, magnolia, berry, melon, and sweet sugar crystals, creating an intoxicating aroma that captivates the senses.

* Compare our fragrance to Blackberry Magnolia® dupe by Crafters Choice.



Flashpoint:  > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 12.50 %Body Wash: 12.50 %Bath Bombs: 12.50 %
Body Lotion: 0.12%Body Scrub: 12.50 %Candles: 100%
Perfume: 0.12 %Deodorant: 0.12 %Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Crafters Choice.

$25.20
Blue Hawaiian BBW Type

An exotic blend of coconut, lemon, orange and pineapple with sweet vanilla base.

* Compare our fragrance to Blue Hawaiian® Bath & Body Works.


Flashpoint:  159° F
Vanilla Content:  1.00%
Country of Origin: USA
Phthalates: Not Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

Soap: 16.67%Body Wash: 16.67%Bath Bombs: 16.67%
Body Lotion: 0.07%Body Scrub: 16.67%Candles: 100%
Perfume: 0.07%Deodorant: 0.07%Lip: 0.00%

INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Body Works.

$23.20
Blueberry Sugar BBW Type

Description:  A delicious blend of fresh blueberries accentuated by warm brown sugar in a graham cracker crust is sure to make your mouth water.

* Compare our fragrance to Blueberry Sugar® by Bath & Body Works.



Flashpoint:  181° F
Vanilla Content:  6.12%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 16.67%Body Wash: 16.67%Bath Bombs: 16.67%
Body Lotion: 16.67%Body Scrub: 16.67%Candles: 100%
Perfume: 16.67%Deodorant: 3.33%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$26.20
Bom Dia Bright by Sol De Janeiro® Type

This highly-addictive scent is a dupe of the super-popular Bom Dia Bright cream scent!!  Warm, rich notes of vanilla and black amber plum - Dupe of SOL Janerio's popular Cheirosa '40 fragrance.

* Compare our fragrance to Bom Dia Bright Cream® SOL Janeiro.


Flashpoint:  199° F
Vanilla Content:  10.00%
Country of Origin: USA
Phthalates: Phthalate Free
Skin Safe:  Yes
Oil Color: 
Pale Yellow
Formulated For: 
Soap / Candle
Essential Oils In Fragrance: 
None

Top Notes:  Black Amber Plum, Creme de Cassis
Middle Notes:  Jasmine Blooms, Brazilian Orchid 
Bottom Notes: Vanilla Woods, Warm Musk

IFRA SHEET


IFRA Maximum Skin Exposure Levels:

Soap: 6.77%Body Wash: 6.77%Bath Bombs: 6.77%
Body Lotion: 2.14%Body Scrub: 6.77%Candles: 100%
Perfume: 21.50%Deodorant: 1.15%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 

Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with SOL Janeiro.

$28.20
Bourbon Strawberry & Vanilla BBW Type

An intoxicating scent of bourbon, vanilla, garden strawberries and apricot nectar. 

* Compare our fragrance to Bourbon Strawberry & Vanilla® Bath & Body Works.


Flashpoint: > 200° F
Vanilla Content:  0.74 %
Country of Origin: USA
Phthalate Content: Phthalate Free
Skin Safe: 
Yes
Oil Color: 
Pale Yellow
Formulated For: 
Soap / Candle
Essential Oils In Fragrance: 
None

Top Notes:  Strawberry
Middle Notes:  Bourbon
Bottom Notes:  Vanilla

IFRA SHEET

IFRA Maximum Skin Exposure Levels:

Soap: 22.72%Body Wash: 22.72%Bath Bombs: 22.72%
Body Lotion: 38.46%Body Scrub: 22.72%Candles: 100%
Perfume: 38.46%Deodorant: 3.84%Lip: 0.00%


How did it perform in Cold Process Soap?



INCI (International Nomenclature of Cosmetic Ingredients): 

Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Body Works.

$25.20
Brazilian Jasmine + Pink Dragonfruit Sol De Janeiro® Type

This new Sol de Janerio scent is a winner!  You may know this fragrance as Beija Flora and Cheirosa '68.   Immerse yourself in the vibrant scents of Brazilian Jasmine, pink dragonfruit, and sheer vanilla. Experience the delightful sensation of this unexpectedly fresh combination, as it enchants your senses with its lively and invigorating essence.

* Compare our fragrance to Beija Flora® SOL Janeiro.


Flashpoint: > 200° F
Vanilla Content:  < 0.1 %
Country of Origin: USA
Phthalates: Phthalate Free
Skin Safe:  Yes
Oil Color: 
Pale Yellow
Formulated For: 
Soap / Candle
Essential Oils In Fragrance: 
None

Top Notes:  Pink Dragonfruit, Lychee Essence
Middle Notes:  Brazilian Jasmine, Ocean Air, Hibiscus
Bottom Notes:  Sheer Vanilla, Sun Musk

IFRA SHEET

IFRA Maximum Skin Exposure Levels:

Soap: 69.76%Body Wash: 69.76%Bath Bombs: 69.76%
Body Lotion: 100%Body Scrub: 69.76%Candles: 100%
Perfume: 100%Deodorant: 31.97%Lip: 0.00%


How did it perform in Cold Process Soap?


INCI (International Nomenclature of Cosmetic Ingredients): 

Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with SOL Janeiro.

$24.20
Caramelized Vanilla + Macadamia Nut Sol De Janeiro® Type

Surround yourself in the luxurious symphony of caramelized vanilla, toasted macadamia, and tonka bean. Experience the exquisite pleasure of this delectably indulgent blend, as it caresses your senses with its rich and enticing aroma. This is a dupe of the Cherosa 71 fragrance.

* Compare our fragrance to Caramelized Vanilla + Macadamia Nut® SOL Janeiro.


Flashpoint: > 200° F
Vanilla Content:  10.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Skin Safe:  Yes
Oil Color: 
Pale Yellow
Formulated For: 
Soap / Candle
Essential Oils In Fragrance: 
None

Top Notes:  Caramelized Vanilla, Sea Salt
Middle Notes: Toasted Macadamia Nut, White Chocolate
Bottom Notes:  Tonka Beans, Coconut Blossom


IFRA Maximum Skin Exposure Levels:

Soap: 100%Body Wash: 100%Bath Bombs: 100%
Body Lotion: 100%Body Scrub: 100%Candles: 100%
Perfume: 100%Deodorant: 100%Lip: 0.00%


How did it perform in Cold Process Soap?




INCI (International Nomenclature of Cosmetic Ingredients): 

Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with SOL de Janeiro.

$23.20
Caribbean Teakwood

A UNIQUE COMBINATION OF FRESH CITRUS FOLLOWED BY LIGHT SPICE NOTES OF CINNAMON AND CLOVE ON A WARM BASE OF AMBER, VANILLA AND SWEET WOODY NOTES.

Flashpoint:  >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap and Candle



IFRA Maximum Skin Exposure Levels:

Soap: 12.00%Body Wash: 12.00%Bath Bombs: 12.00%
Body Lotion: 16.28%Body Scrub: 12.00%Candles: 100%
Perfume: 64.49%Deodorant: 3.45%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

$22.20
Casa Pacifica by Voluspa Type

NOTES OF PACIFIC COAST DRIFTWOOD, THE SPRAY OF OCEAN WAVES CRASHING THE THE ROCKS AND WILD BRUSH OF THE SEASHORE REMIND SOMEONE OF A BEACH HOUSE ON THE WEST COAST.

* Compare our fragrance to Casa Pacifica® by Voluspa


Flashpoint: >200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 31.65%Body Wash: 31.65%Bath Bombs: 31.65%
Body Lotion: 0.07%Body Scrub: 31.65%Candles: 100%
Perfume: 0.07%Deodorant: 0.07%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Voluspa.

$30.20
Cloudberry and Balsam Wooden Wick Type
Plump pink cloudberries and fresh balsam intertwine in this Wooden Wick Dupe.

* Compare our fragrance to Cloudberry + Balsam® by Wooden Wick.


Flashpoint: >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

Soap: 95.50%Body Wash: 95.50%Bath Bombs: 95.50%
Body Lotion: 76.25%Body Scrub: 95.50%Candles: 100%
Perfume: 100%Deodorant: 16.05%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Wooden Wick.

$22.20
Coco Cabana Cream by Sol De Janeiro® Type

This highly-addictive scent is a dupe of the super-popular Coco Cabana cream scent!!  Indulge in the captivating allure of coconut, expertly infused with a fusion of Brazilian-inspired ingredients. Experience the mesmerizing fragrance that intertwines the velvety charm of fresh green coconuts, the exotic fascination of tropical orchids, and the irresistible decadence of toasted praline. Dupe of SOL de Janerio's Cheirosa 39 fragrance.

* Compare our fragrance to Coco Cabana Cream® SOL Janeiro.


Flashpoint: > 199° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candles


IFRA Maximum Skin Exposure Levels:

Soap: 13.33%Body Wash: 13.33%Bath Bombs: 13.33%
Body Lotion: 28.33%Body Scrub: 13.33%Candles: 100%
Perfume: 2.27%Deodorant: 6.11%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 

Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with SOL Janeiro.

$27.20
Cocoa Butter Cashmere® Brambleberry Type

Description: This scent has essences of light spices, cedarwood, vanilla tonka, coconut, jasmine, olive wood, sandalwood, amber, musk, and cocoa butter. 

* Compare our fragrance to Cocoa Butter Cashmere® by Brambleberry.


Flashpoint:  181 F
Vanilla Content:  10.80%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle


IFRA Maximum Skin Exposure Levels:

Soap: 12.90%Body Wash: 12.90%Bath Bombs: 12.90%
Body Lotion: 43.65%Body Scrub: 12.90%Candles: 100%
Perfume: 27.78%Deodorant: 6.35%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Brambleberry.

$25.20
Cocoa Ganache and Vanilla Truffle® Wooden Wick Type
A delicious and sophisticated blend of warm vanilla truffle and lucious cocoa ganache.

* Compare our fragrance to Cocoa Ganache and Vanilla Truffle® by Wooden Wick.


Flashpoint: >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

Soap: 2.32%Body Wash: 2.32%Bath Bombs: 2.32%
Body Lotion: 5.25%Body Scrub: 2.32%Candles: 100%
Perfume: 0.50%Deodorant: 1.71%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

$26.69
Coconut Milk Crafter's Choice Type

Creamy coconut milk blended with flakes of shaved coconut, warm vanilla and white musk.

* Compare our fragrance to Coconut Milk® dupe of Crafters Choice.



Flashpoint:  > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 19.75%Body Wash: 19.75%Bath Bombs: 19.75%
Body Lotion: 28.00%Body Scrub: 19.75%Candles: 100%
Perfume: 18.00%Deodorant: 4.33%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Crafters Choice.

$23.20
Dark Rose and Labdanum Wooden Wick Type
Deep sweet plum and dark rose blend together to make this seductively delicious floral scent.

* Compare our fragrance to Dark Rose and Labdanum® by Wooden Wick.


Flashpoint: >200° F
Vanilla Content:  >1%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

Soap: 12.26%Body Wash: 12.26%Bath Bombs: 12.26%
Body Lotion: 3.58%Body Scrub: 12.26%Candles: 100%
Perfume: 43.0%Deodorant: 2.30%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Wooden Wick.

$30.20
Dried Florals and Incense Wooden Wick Type

Description:  Spicy notes mix with smoky and floral notes in this fragrance accord.

* Compare our fragrance to Dried Florals and Incense® by Wooden Wick.


Flashpoint: >200 F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle


IFRA Maximum Skin Exposure Levels:

Soap: 12.06%Body Wash: 12.06%Bath Bombs: 12.06%
Body Lotion: TBD%Body Scrub: 12.06%Candles: 100%
Perfume: TBD%Deodorant: TBD%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

$26.20
Driftwood and Juniper by Wooden Wick Type

Description:  This unique combination of tobacco and incense is intertwined with the scent of the ocean and the floral and fern notes from the Mediterranean region.

* Compare our fragrance to Driftwood and Juniper® by Wooden Wick.


Flashpoint: TBDF
Vanilla Content:  TBD%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle


IFRA Maximum Skin Exposure Levels:

Soap: 8.33%Body Wash: 8.33%Bath Bombs: 8.33%
Body Lotion: TBD%Body Scrub: 8.33%Candles: 100%
Perfume: TBD%Deodorant: TBD%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Wooden Wick.

$25.20
Energy BBW Type - Orange/Ginger

A true aromatherapy experience! This is one of my favorite scents from Bath & Body Works. It is a perfect combination of a slightly sweet, citrus-y fragrance plus the rich, spicier note of the ginger. The scent is pleasantly lingering and really does provide a bit of a lift throughout the day. No discoloration or ricing but moderate acceleration in CP soaps.

* Compare our fragrance to Energy® by Bath and Body Works.


Flashpoint: > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 21.82%Body Wash: 21.82%Bath Bombs: 21.82%
Body Lotion: 0.06%Body Scrub: 21.82%Candles: 100%
Perfume: 0.06%Deodorant: 0.13%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$26.20
Eucalyptus Spearmint Peak Candle Type

What a fresh, clean scent! This is a spot-on dupe of the Bath & Bodyworks fragrance. It's a wonderful blend of eucalyptus and minty spearmint. Relaxing and soothing!

 

* Compare our fragrance to Eucalyptus Spearmint® dupe by Peak Candle of Bath & Bodyworks scent.



Flashpoint:  196° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 8.03%Body Wash:8.03%Bath Bombs: 8.03%
Body Lotion: 0.06%Body Scrub: 8.03%Candles: 100%
Perfume: 0.06%Deodorant: 0.06%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$22.20
Evening Air Yankee Candle Type

AN AUTUMN NIGHT WITH THE AROMA OF JASMINE, LILAC, SANDALWOOD AND MUSK.


* Compare our fragrance to Evening Air by Yankee Candle.

Flashpoint: > 200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 17.24%Body Wash: 17.24%Bath Bombs: 17.24%
Body Lotion: 22.00%Body Scrub: 17.24%Candles: 100%
Perfume: 86.00%Deodorant: 4.60%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Yankee Candle.

$23.20
F**cking Fabulous Tom Ford Type

F**cking Fabulous is just that...it's probably the most perfect description of a fragrance I've ever heard! It made it's debut during New York Fashion Week in 2017 and it's been popular ever since. Retailing for $335 for 1.7 fl oz of perfume - it's definitely one you'll want in your arsenal!

Description: Sephora says this fragrance is "explicit, exclusive, and fabulous, this oriental artisanal scent features spices and warm and sweet gourmands."

* Compare our fragrance to Fucking Fabulous by Tom Ford.

Notes: 
Lavender, Sage, Bitter Almond, Tonka Beans, Leather, Cashmere and Amber. The essential oils used to make this dupe include Amyris, Chamomile and Patchouli.


Flashpoint:  >200° F
Vanilla Content:  0.12%
Country of Origin: USA
Phthalates: Phthalate Free
Formulate For:  Fine Fragrance / Body Oil



IFRA Maximum Skin Exposure Levels:

Soap: 12.50%Body Wash: 12.50%Bath Bombs: 12.50%
Body Lotion: 12.50%Body Scrub: 12.50%Candles: 100%
Perfume: 12.50%Deodorant: 3.75%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Tom Ford.

$28.20
Febreze Air Wood by Febreze Type

Description from Febreze: Notes of oud, amber, and cedar create an ambience of craftsmanship and nature.

* Compare our fragrance to Febreze Air Wood® by Febreze.


Flashpoint: TBD° F
Vanilla Content:  TBD%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle


IFRA Maximum Skin Exposure Levels:

Soap: TBD%Body Wash: TBD%Bath Bombs: TBD%
Body Lotion: TBD%Body Scrub: TBD%Candles: 100%
Perfume: TBD%Deodorant: TBD%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Febreze.

$33.20
French Lavender & Honey BBW Type

Intoxicating French Lavender flowers which have been sprinkled with a bit of sweet honey and anchored with a musk base. It held it's scent through CP gel. Great for Valentine's Day or Mother's Day!  Bath bombs with this scent were AMAZING! There was no ricing or discoloration.

* Compare our fragrance to French Lavender & Honey® by Bath and Body Works.


Flashpoint: > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 66.67%Body Wash: 66.67%Bath Bombs: 66.67%
Body Lotion: 0.06%Body Scrub: 66.67%Candles: 100%
Perfume: 0.06%Deodorant: 0.13%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$23.20
French Vanilla & Amber Peak Type

Such a warm and inviting scent! Delicious vanilla combined with warm amber and soft wood notes. Formulated for candles but skin safe up to 1.88%.

* Compare our fragrance to French Vanilla and Amber® dupe by Peak Candle.



Flashpoint:  > 200° F
Vanilla Content:  6.72 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 67.20 %Body Wash: 67.20 %Bath Bombs: 67.20 %
Body Lotion: 1.88%Body Scrub: 67.20 %Candles: 100%
Perfume: 1.88 %Deodorant: 1.88 %Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$23.20
Fresh Baked Bread

Smells just like fresh baked bread straight out of the oven! 


Flashpoint:  199° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candles


IFRA Maximum Skin Exposure Levels:

Soap: 1.00%Body Wash: 1.00%Bath Bombs: 1.00%
Body Lotion: 1.00%Body Scrub: 1.00%Candles: 100%
Perfume: 1.00%Deodorant: 1.00%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 

Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

$27.20
Fresh Snow by Diamond Candle Type

Description:  This fragrance is an intoxicating blend of eucalyptus and peppermint and reminds one of being outside after a fresh snow on a crisp morning. This will definitely be a new holiday favorite!

* Compare our fragrance to Fresh Snow® by Diamond Candles.



Flashpoint:  ° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

Soap: %Body Wash: %Bath Bombs: %
Body Lotion: %Body Scrub: %Candles: 100%
Perfume: %Deodorant: %Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with Diamond Candle.

$12.60
Fresh Sparkling Snow BBW Type

Description:  ORANGE ZEST, MELON BALLS AND WILD BERRIES WITH A HINT OF EXOTIC MUSK.

* Compare our fragrance to Fresh Sparkling Snow® by Bath & Body Works.



Flashpoint:  198° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 100%Body Wash: 100%Bath Bombs: 100%
Body Lotion: 100%Body Scrub: 100%Candles: 100%
Perfume: 100%Deodorant: 22.61%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$12.10
Fruit Loops
Fruit Loops Type

In a blind smell test, my 10 year old could tell this was fruit loops - it's truly SPOT ON!!! Just like the cereal you'll smell sweet orange and tangy cherry. No acceleration or ricing. Slight discoloration but can be fixed with either mica or titanium dioxide.

* Compare our fragrance to Froot Loops® by Kellogg.


Flashpoint: 167° F
Vanilla Content:  2.00 %
Country of Origin: USA
Phthalates: Not Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 17.30%Body Wash: 17.30%Bath Bombs: 17.30%
Body Lotion: 0.01%Body Scrub: 17.30%Candles: 100%
Perfume: 0.01%Deodorant: 0.01%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Kellogg.

$24.20
Gingham Fine Fragrance BBW Type

Your favorite fragrance from the 90's has been brought back by Bath and Bodyworks by popular demand. This fine fragrance is going to be a BEST SELLER for our customers for sure!  

SUPER STRONG!! A fresh blend of bright florals & a touch of sweet citrus. It has note of sweet clementine, soft violet petals and blue freesia. Intoxicating!

* Compare our fragrance to Gingham fine fragrance by Bath and Bodyworks.


Flashpoint: 181 F 
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 24.51%Body Wash: 24.51%Bath Bombs: 24.51%
Body Lotion: 9.80%Body Scrub: 24.51%Candles: 100%
Perfume: 100%Deodorant: 1.96%Lip: 0%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Bodyworks.

$31.20
Per Page      1 - 40 of 118