Fragrance Oils

Sort By:  
$19.69
Out of Stock
$18.69
Ground Only
Out of Stock
$19.69
$20.69
Out of Stock
$19.69
$26.69
$22.69
$21.69
$23.69
Out of Stock
$22.69
$20.69
$18.69
$18.69
$21.69
Out of Stock
$19.69
$19.69
$18.69
$21.69
$23.69
Out of Stock
$25.69
$21.69
A Thousand Wishes BBW Type

Warm your heart a thousand times over with a festive blend of sparkling champagne, crystal peonies and almond crème over a soothing base of amber, sandalwood, and musk.

* Compare our fragrance to A Thousand Wishes® Bath & Body Works.


Flashpoint: > 200° F
Vanilla Content:  0.29 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

Soap: 33.33%Body Wash: 33.33%Bath Bombs: 33.33%
Body Lotion: 0.26%Body Scrub: 33.33%Candles: 100%
Perfume: 0.26%Deodorant: 0.26%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Body Works.

$19.69
Almond Delight (Ground Shipping Only)

Heaven in a bottle! This almond scented fragrance oil is the best smelling one that I've found. Amazing aroma! Smells exactly like almond extract. Super strong. Safe at only levels of 1-2% maximum.

Flashpoint: 187° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free



IFRA Maximum Skin Exposure Levels:

Soap: 1.00%Body Wash: 1.00%Bath Bombs: 1.00%
Body Lotion: 0.10%Body Scrub: 1.00%Candles: 100%
Perfume: 0.01%Deodorant: 0.01%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Out of Stock
$18.69
Aloha Kiwi Passionfruit BBW Type

Description:  A playful yet juicy fragrance of tropical passionfruit, kiwi and pineapple intertwined with fresh coconut that encompasses a sunny beach day.

* Compare our fragrance to Aloha Kiwi Passionfruit® by Bath & Body Works.



Flashpoint:  180° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated for:  Soap / Candles



IFRA Maximum Skin Exposure Levels:

Soap: 7.14%Body Wash: 7.14%Bath Bombs: 7.14%
Body Lotion:7.14%Body Scrub: 7.14%Candles: 100%
Perfume:7.14%Deodorant: 1.43%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

Out of Stock
$19.69
Aloha Vanilla

The rich scent of tropical island breezes coupled with the scent of sweet mango and creamy coconut intertwine with delicate, powdery lotus flower and creamy vanilla nuances to blend together and complete this tropical, fruity, floral accord.


Flashpoint: > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 8.94%Body Wash: 8.94%Bath Bombs: 8.94%
Body Lotion: 8.94%Body Scrub: 8.94%Candles: 100%
Perfume: 13.24%Deodorant: 3.93%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

$20.69
Apple Cider Yankee Candle Type

HOT APPLE CIDER INFUSED WITH CRUSHED CINNAMON, WARM CLOVE AND A HINT OF VANILLA EXTRACT.


* Compare our fragrance to Apple Cider by Yankee Candle.

Flashpoint: 187° F
Vanilla Content:  1.50%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 5.88%Body Wash: 5.88%Bath Bombs: 5.88%
Body Lotion: 5.88%Body Scrub: 5.88%Candles: 100%
Perfume: 5.00%Deodorant: 1.00%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Yankee Candle.

Out of Stock
$19.69
At The Beach BBW Type

Description from BBW: Take a trip to the beach in this summer fragrance. It is composed of a gorgeous blend of white frangipani, coconut, bergamot, ozone, and musk.

* Compare our fragrance to At The Beach® by Bath & Body Works.



Flashpoint:  181° F
Vanilla Content:  0.60%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 14.08%Body Wash: 14.08%Bath Bombs: 14.08%
Body Lotion: 0.05%Body Scrub: 14.08%Candles: 100%
Perfume: 0.05%Deodorant: 0.05%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$27.69
Avobath LUSH Type

Lose yourself in this amazing lemongrass smelling dupe of this LUSH scent. A best seller for every customer we talk with! Super strong. 

* Compare our fragrance to Avobath® by LUSH.


Flashpoint: 183° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 11.49%Body Wash: 11.49%Bath Bombs: 11.49%
Body Lotion: 1.38%Body Scrub: 11.49%Candles: 100%
Perfume: 1.38%Deodorant: 0.11%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with LUSH.

$26.69
Avocado and Sea Salt Just Scent Type
Description: You're gonna love this one! Creamy avocado are intertwined with notes of rose, grapefruit and salty sea air.

* Compare our fragrance to Avocado and Sea Salt® by Just Scent.


Flashpoint: >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soaps and Candles


IFRA Maximum Skin Exposure Levels:

Soap: 1.68%Body Wash: 1.68%Bath Bombs: 1.68%
Body Lotion: 3.73%Body Scrub: 1.68%Candles: 100%
Perfume: 25.47%Deodorant: 3.42%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Just Scent.

$19.69
Avocado Coconut BBW Type

Description: Lush ripe avocado with kisses of tart lime lead this refreshing fragrance. Creamy coconut, vanilla, and musk forms its comforting base.

* Compare our fragrance to Avocado Coconut® by Bath & Body Works.



Flashpoint:  181° F
Vanilla Content:  1.80%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated for: Soap / Candles



IFRA Maximum Skin Exposure Levels:

Soap: 10.00%Body Wash: 10.00%Bath Bombs: 10.00%
Body Lotion: 9.62%Body Scrub: 10.00%Candles: 100%
Perfume: 6.41%Deodorant: 1.60%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$18.69
Baja Cactus Blossom BBW Type

If you close your eyes you can really smell the blossom and scent of fresh, green cactus on a cool summer night in the desert.

* Compare our fragrance to Baja Cactus Blossom® Bath & Body Works.


Flashpoint: > 200° F
Vanilla Content:  0.97 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 4.44%Body Wash: 4.44%Bath Bombs: 4.44%
Body Lotion: 1.67%Body Scrub: 4.44%Candles: 100%
Perfume: 1.67%Deodorant: 0.89%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Body Works.

$22.69
Balsam and Cedar Yankee Type

This is Yankee Candle's highest selling fragrance year round! It's a wonderful blend of of Balsam, aromatic cedar wood and juniper berry. 

* Compare our fragrance to Yankee Candle's Balsam and Cedar®.



Flashpoint: 182° F
Vanilla Content:  0.08 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 20.00%Body Wash: 20.00%Bath Bombs: 20.00%
Body Lotion:7.69%Body Scrub: 20.00%Candles: 100%
Perfume: 20.00%Deodorant: 6.87%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Yankee Candle.

$21.69
Banana Bundt Cake® BBW Type
Mouth-watering spice cake rich with fresh banana and toasted walnuts.

* Compare our fragrance to Banana Bundt Cake® by Bath & Bodyworks.

Flashpoint:  181° F
Vanilla Content:  2.11%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 1.41%Body Wash: 1.41%Bath Bombs: 1.41%
Body Lotion: 1.41%Body Scrub: 1.41%Candles: 100%
Perfume: 1.41%Deodorant: 0.56%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Bodyworks.

$23.69
Bayberry Candle Science Type

Breathe in the scent of Christmas! Bayberry scent is an intoxicating blend of balsam and fir with nutmeg and spice. Very festive!

* Compare our fragrance to Bayberry® dupe by Candle Science.



Flashpoint:  181° F
Vanilla Content:  1.10 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 3.13 %Body Wash: 3.13 %Bath Bombs: 3.13 %
Body Lotion: 0.11%Body Scrub: 3.13 %Candles: 100%
Perfume: 0.11 %Deodorant: 0.11 %Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Candle Science.

$23.69
Beach by Bobbi Brown Type

If you close your eyes you will feel like you are at the beach! A distinctive blend of sun, sand and suntan lotion all rolled into one!  

* Compare our fragrance to Beach® by Bobbi Brown.


Flashpoint: > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 25.00%Body Wash: 25.00%Bath Bombs: 25.00%
Body Lotion: 0.16%Body Scrub: 25.00%Candles: 100%
Perfume: 0.16%Deodorant: 0.16%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bobbi Brown.

$23.69
Beach Walk Yankee Type
Refreshing salt water and sea musk warmed with sunny notes of tangerine and orange blossom.

* Compare our fragrance to Beach Walk® by Yankee Candle.


Flashpoint: >200° F
Vanilla Content:  0.30%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle


IFRA Maximum Skin Exposure Levels:

Soap: 5.71%Body Wash: 5.71%Bath Bombs: 5.71%
Body Lotion: 5.71%Body Scrub: 5.71%Candles: 100%
Perfume: 5.71%Deodorant: 0.57%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Yankee Candle.

$22.69
Beautiful Day BBW Type

Beautiful Day is a BBW best seller and we can see why! It's a playful blend of  Dewy green fresh fruity floral with apple, berries, airy cyclamen, water lily, dew, rose and musk.

* Compare our fragrance to Beautiful Day® Bath & Body Works.


Flashpoint: > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Not Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 16.67%Body Wash: 16.67%Bath Bombs: 16.67%
Body Lotion: 16.67%Body Scrub: 16.67%Candles: 100%
Perfume: 9.60%Deodorant: 1.67%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Body Works.

Out of Stock
$22.69
Bedtime Bath Johnson & Johnson Type

Description: A soothing blend of blooming lavender and fresh chamomile.

* Compare our fragrance to Bedtime Bath® by Johnsons and Johnsons.



Flashpoint:  >200° F
Vanilla Content:  0.15%
Country of Origin: USA
Phthalate Content: CONTAINS PHTHALATES
Formulated For:
  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 5.71%Body Wash: 5.71%Bath Bombs: 5.71%
Body Lotion: 0.30%Body Scrub: 5.71%Candles: 100%
Perfume: 0.30%Deodorant: 0.30%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Johnson's & Johnson's.

$20.69
Bergamot Waters BBW Type

A delightful aroma that balances crisp bergamot with refreshing blue water notes over a slightly sweet sandalwood base.

* Compare our fragrance to Bergamot Waters® Bath & Body Works.


Flashpoint:  181° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle

IFRA Maximum Skin Exposure Levels:

Soap: 100%Body Wash: 100%Bath Bombs: 100%
Body Lotion: 100%Body Scrub: 100%Candles: 100%
Perfume: 0.26%Deodorant: 0.26%Lip: 0.00%


How did it perform in Cold Process Soap?


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Body Works.

$20.69
Berry Waffle Cone BBW Type

Sweet Summer Berries, Golden Waffle Cone, Creamy Vanilla


Probably not the best fragrance for soaps due to the low IFRA %.

* Compare our fragrance to Berry Waffle Cone® by Bath & Body Works.



Flashpoint:  >200° F
Vanilla Content:  0.10 %
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 0.91%Body Wash: 0.91%Bath Bombs: 0.91%
Body Lotion: 31.11%Body Scrub: 0.91%Candles: 100%
Perfume: 0.91%Deodorant: 0.36%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$18.69
Berrylicious Yankee Type

The cranberry-cherry-tomato nuances of lightly sweet dried goji berries of the Himalayan mountain regions and tangy blackberries intertwine with sweet, savory blueberry tonalities and creamy vanilla scents. These notes blend together to unite, enhance and complete this fragrant accord.


* Compare our fragrance to Berrylicious by Yankee Candle.

Flashpoint:  176° F
Vanilla Content:  2.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 100%Body Wash: 100%Bath Bombs: 100%
Body Lotion: 100%Body Scrub: 100%Candles: 100%
Perfume: 100%Deodorant: 100%Lip:  0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Yankee Candle.

$19.69
Birthday Cake Peak Candle Type

No need to make a wish - it's already granted! This amazing birthday cake scent features scrumptious white cake frosted with a vanilla butter cream. Truly - it's the scent of bakery fresh cakes! 

* Compare our fragrance to Birthday Cake® dupe by Peak Candle.



Flashpoint:  > 200° F
Vanilla Content:  16.15 %
Country of Origin: USA
Phthalates: Not Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 83.33 %Body Wash: 83.33 %Bath Bombs: 83.33 %
Body Lotion: 14.00%Body Scrub: 83.33 %Candles: 100%
Perfume: 9.00 %Deodorant: 2.17 %Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Peak Candles.

$18.69
Black Cherry Merlot
Black Cherry Merlot BBW Type

Talk about the perfect combination of tangy black cherries and red merlot! Sticks great in CP soap.

* Compare our fragrance to Black Cherry Merlot® Bath & Body Works.


Flashpoint: > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candles



IFRA Maximum Skin Exposure Levels:

Soap: 40.00%Body Wash: 40.00%Bath Bombs: 40.00%
Body Lotion: 10.38%Body Scrub: 1.11%Candles: 100%
Perfume: 3.46%Deodorant: 0.77%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Body Works.

$21.69
Black Pearl LUSH Type

Description: Soothing chamomile intertwines with the clean scent of lavender. Resinous olibanum and aromatic myrrh scents blend together to enhance and complete this fragrant accord.

* Compare our fragrance to Black Pearl® by LUSH.



Flashpoint:  >200° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 6.25%Body Wash: 6.25%Bath Bombs: 6.25%
Body Lotion: 2.67%Body Scrub: 6.25%Candles: 100%
Perfume: 2.67%Deodorant: 1.25%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with LUSH.

Out of Stock
$19.69
Black Raspberry Vanilla BBW Type

Finally! A great smelling black raspberry vanilla fragrance that WILL NOT discolor! Ripe black raspberries are combined with a creamy vanilla musk that really holds it's sent through CP and beyond.

* Compare our fragrance to Black Raspberry Vanilla® by Bath & Body Works.


Flashpoint: 196° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 6.25%Body Wash: 6.25%Bath Bombs: 6.25%
Body Lotion: 0.05%Body Scrub: 6.25%Candles: 100%
Perfume: 0.05%Deodorant: 0.05%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath & Body Works.

$19.69
Black Tie BBW Type

Description: A seductive combination of fragrant sage with tonka bean and a touch of deep rich sandalwood.

* Compare our fragrance to Black Tie® by Bath and Bodyworks.


Flashpoint:  181° F
Vanilla Content:  0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soaps: 70.62%Body Wash: 70.62%Bath Bombs: 70.62%
Body Lotion: 0.04%Body Scrub: 70.62%Candles: 100%
Perfume: 0.04%Deodorant: 0.04%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Bodyworks.

$19.69
Blackberry Jam Butter Cookies

Yummy buttery goodness combined with the sweet blackberry jam scent. It's a HIT already in candles and would be amazing in anything, really!  No acceleration or ricing in CP soap. Discoloration due to 5.5% vanilln content - needs a color stabilizer. 

Flashpoint:  171° F
Vanilla Content:  14.00 %
Country of Origin: USA
Phthalates: Not Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 15.90%Body Wash: 15.90%Bath Bombs: 15.90%
Body Lotion: 1.50%Body Scrub: 15.90%Candles: 100%
Perfume: 1.50%Deodorant: 1.50%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

$18.69
Blackberry Magnolia Crafters Choice Type

An intoxicating blend of apple, magnolia, berry, melon and sugar crystals. 

* Compare our fragrance to Blackberry Magnolia® dupe by Crafters Choice.



Flashpoint:  > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 12.50 %Body Wash: 12.50 %Bath Bombs: 12.50 %
Body Lotion: 0.12%Body Scrub: 12.50 %Candles: 100%
Perfume: 0.12 %Deodorant: 0.12 %Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Crafters Choice.

$21.69
Blueberry Sugar BBW Type

Description:  A delicious blend of fresh blueberries accentuated by warm brown sugar in a graham cracker crust is sure to make your mouth water.

* Compare our fragrance to Blueberry Sugar® by Bath & Body Works.



Flashpoint:  181° F
Vanilla Content:  6.12%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 16.67%Body Wash: 16.67%Bath Bombs: 16.67%
Body Lotion: 16.67%Body Scrub: 16.67%Candles: 100%
Perfume: 16.67%Deodorant: 3.33%Lip: 0.00%


INCI (International No50.00menclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.

$23.69
Bom Dia Bright by Sol De Janiro® Type

This highly-addictive scent is a dupe of the super-popular Bom Dia Bright cream scent!!  Warm, rich notes of vanilla and black amber plum - Dupe of SOL Janerio's popular Cheirosa '40 fragrance.

* Compare our fragrance to Bom Dia Bright Cream® SOL Janeiro.


Flashpoint:  199° F
Vanilla Content:  10.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candles


IFRA Maximum Skin Exposure Levels:

Soap: 6.77%Body Wash: 6.77%Bath Bombs: 6.77%
Body Lotion: 2.14%Body Scrub: 6.77%Candles: 100%
Perfume: 21.50%Deodorant: 1.15%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 

Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentsational Soaping Supply is not affiliated or associated with SOL Janeiro.

Out of Stock
$25.69
Bombshell
Bombshell Victoria's Secret Type

One of Victoria's Secret's best selling fragrances! It's a sultry mix of grapefruit with floral. Very light and intoxicating!  

* Compare our fragrance to Bombshell® by Victoria's Secret.


Flashpoint: > 200° F
Vanilla Content:  0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For:  Soap / Candle



IFRA Maximum Skin Exposure Levels:

Soap: 23.81%Body Wash: 23.81%Bath Bombs: 23.81%
Body Lotion: 0.07%Body Scrub: 23.81%Candles: 100%
Perfume: 0.07%Deodorant: 0.07%Lip: 0.00%


INCI (International Nomenclature of Cosmetic Ingredients): 
Fragrance

Common Name Ingredient List (FDA Approved):
Fragrance

Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.

CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)

The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.

EXAMPLE: 

Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%

This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.

We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.

It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.

You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.

Scentational Soaping Supply is not affiliated or associated with Victoria's Secret.

$21.69
Per Page      1 - 30 of 204