Limited Editions
You're in luck!! All of these fragrances were brought in by our SSS - ISO Facebook group and are Limited Editions. Once they're gone we won't bring them in again until another group buy opens up.
Description: Succulent pineapple, black currant, crisp bergamot and delicious apple notes intertwine with aromatic birch wood notes, minty patchouli, sweet jasmine, crimson rose notes. Warm musk, grassy vetiver, provocative ambergris and creamy vanilla blend together to enhance and complete this fragrant accord.
* Compare our fragrance to Aventus® by Creed.
Flashpoint: 176° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalate Content: CONTAINS PHTHALATES
Formulated For: Fine Fragrance / Body Oil
IFRA Maximum Skin Exposure Levels:
Soap: 74.52% | Body Wash: 74.52% | Bath Bombs: 74.52% | |||
Body Lotion: 76.92% | Body Scrub: 74.52% | Candles: 100% | |||
Perfume: 76.92% | Deodorant: 7.69% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Creed.
Description: Juicy winter berries intertwined with lush vanilla bean, ruby red pomegranate and a twist of mandarin.
* Compare our fragrance to Berry Vanilla Bean® by Bath & Body Works.
Flashpoint: >200° F
Vanilla Content: 5.42%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 2.51% | Body Wash: 2.51% | Bath Bombs: 2.51% | |||
Body Lotion: 1 09% | Body Scrub: 2.51% | Candles: 100% | |||
Perfume: 6.34% | Deodorant: 1.85% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.
The cranberry-cherry-tomato nuances of lightly sweet dried goji berries of the Himalayan mountain regions and tangy blackberries intertwine with sweet, savory blueberry tonalities and creamy vanilla scents. These notes blend together to unite, enhance and complete this fragrant accord.
* Compare our fragrance to Berrylicious by Yankee Candle.
Flashpoint: 176° F
Vanilla Content: 2.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 100% | Body Wash: 100% | Bath Bombs: 100% | |||
Body Lotion: 100% | Body Scrub: 100% | Candles: 100% | |||
Perfume: 100% | Deodorant: 100% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Yankee Candle.
Description: This gorgeous perfume was created by the fragrance company Givaudan and is hands down a winter favorite among women. The classically dark perfume was presented as oriental chypre and is a timeless fragrance with a heart consisting of black orchid, more imaginary than real, and of arboraceous and spicy scents.
* Compare our fragrance to Black Orchid® by Tom Ford.
Flashpoint: >200° F
Vanilla Content: 3.46%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For: Fine Fragrance / Body Oil
IFRA Maximum Skin Exposure Levels:
Soap: 27.40% | Body Wash: 27.40% | Bath Bombs: 27.40% | |||
Body Lotion: 27.40% | Body Scrub: 27.40% | Candles: 100% | |||
Perfume: 27.40% | Deodorant: 6.85% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Tom Ford.
Description: This is a spicy woody fragrance enhanced with spicy black pepper, bergamot and lavender accords anchored in deep woodsy notes.
* Compare our fragrance to Black Pepper + Bergamot® by Bath & Body Works.
Flashpoint: >200° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 32.00% | Body Wash: 32.00% | Bath Bombs: 32.00% | |||
Body Lotion: 68.00% | Body Scrub: 32.00% | Candles: 100% | |||
Perfume: 100% | Deodorant: 14.66% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentsational Soaping Supply is not affiliated or associated with Bath and Body Works.
Description: A delicious blend of fresh blueberries accentuated by warm brown sugar in a graham cracker crust is sure to make your mouth water.
* Compare our fragrance to Blueberry Sugar® by Bath & Body Works.
Flashpoint: 181° F
Vanilla Content: 6.12%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 16.67% | Body Wash: 16.67% | Bath Bombs: 16.67% | |||
Body Lotion: 16.67% | Body Scrub: 16.67% | Candles: 100% | |||
Perfume: 16.67% | Deodorant: 3.33% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.
NOTES OF PACIFIC COAST DRIFTWOOD, THE SPRAY OF OCEAN WAVES CRASHING THE THE ROCKS AND WILD BRUSH OF THE SEASHORE REMIND SOMEONE OF A BEACH HOUSE ON THE WEST COAST.
* Compare our fragrance to Casa Pacifica® by Voluspa
Flashpoint: >200° F
Vanilla Content: 0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 31.65% | Body Wash: 31.65% | Bath Bombs: 31.65% | |||
Body Lotion: 0.07% | Body Scrub: 31.65% | Candles: 100% | |||
Perfume: 0.07% | Deodorant: 0.07% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Voluspa.
This musky, woody fragrance opens with sweet, citrusy bergamot. The heart surrounds this accord with sweet jasmine, delicate lily of the valley and soft suede. The base fragrantly infuses with soft cashmere wood and warm sandalwood coupled with deep tones of warm amber and musk.
* Compare our fragrance to Cashmere Mist® by DNYK.
Flashpoint: >200° F
Vanilla Content: 0.44%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Fine Fragrance / Body Oil
IFRA Maximum Skin Exposure Levels:
Soap: 26.48% | Body Wash: 26.48% | Bath Bombs: 26.48% | |||
Body Lotion: 9.35% | Body Scrub: 26.48% | Candles: 100% | |||
Perfume: 6.31% | Deodorant: 1.40% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with DNYK.
* Compare our fragrance to Cloudberry + Balsam® by Wooden Wick.
Flashpoint: >200° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soaps and Candles
IFRA Maximum Skin Exposure Levels:
Soap: 95.50% | Body Wash: 95.50% | Bath Bombs: 95.50% | |||
Body Lotion: 76.25% | Body Scrub: 95.50% | Candles: 100% | |||
Perfume: 100% | Deodorant: 16.05% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentsational Soaping Supply is not affiliated or associated with Wooden Wick.
Description: This scent has essences of light spices, cedarwood, vanilla tonka, coconut, jasmine, olive wood, sandalwood, amber, musk, and cocoa butter.
* Compare our fragrance to Cocoa Butter Cashmere® by Brambleberry.
Flashpoint: 181 F
Vanilla Content: 10.80%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 12.90% | Body Wash: 12.90% | Bath Bombs: 12.90% | |||
Body Lotion: 43.65% | Body Scrub: 12.90% | Candles: 100% | |||
Perfume: 27.78% | Deodorant: 6.35% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Brambleberry.
* Compare our fragrance to Cocoa Ganache and Vanilla Truffle® by Wooden Wick.
Flashpoint: >200° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soaps and Candles
IFRA Maximum Skin Exposure Levels:
Soap: 2.32% | Body Wash: 2.32% | Bath Bombs: 2.32% | |||
Body Lotion: 5.25% | Body Scrub: 2.32% | Candles: 100% | |||
Perfume: 0.50% | Deodorant: 1.71% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Wooden Wick.
* Compare our fragrance to Dark Rose and Labdanum® by Wooden Wick.
Flashpoint: >200° F
Vanilla Content: >1%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soaps and Candles
IFRA Maximum Skin Exposure Levels:
Soap: 12.26% | Body Wash: 12.26% | Bath Bombs: 12.26% | |||
Body Lotion: 3.58% | Body Scrub: 12.26% | Candles: 100% | |||
Perfume: 43.0% | Deodorant: 2.30% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentsational Soaping Supply is not affiliated or associated with Wooden Wick.
Description: Spicy notes mix with smoky and floral notes in this fragrance accord.
* Compare our fragrance to Dried Florals and Incense® by Wooden Wick.
Flashpoint: >200 F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 12.06% | Body Wash: 12.06% | Bath Bombs: 12.06% | |||
Body Lotion: TBD% | Body Scrub: 12.06% | Candles: 100% | |||
Perfume: TBD% | Deodorant: TBD% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Wooden Wick.
Description: This unique combination of tobacco and incense is intertwined with the scent of the ocean and the floral and fern notes from the Mediterranean region.
* Compare our fragrance to Driftwood and Juniper® by Wooden Wick.
Flashpoint: TBDF
Vanilla Content: TBD%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 8.33% | Body Wash: 8.33% | Bath Bombs: 8.33% | |||
Body Lotion: TBD% | Body Scrub: 8.33% | Candles: 100% | |||
Perfume: TBD% | Deodorant: TBD% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Wooden Wick.
Description from Febreze: Notes of oud, amber, and cedar create an ambience of craftsmanship and nature.
* Compare our fragrance to Febreze Air Wood® by Febreze.
Flashpoint: TBD° F
Vanilla Content: TBD%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: TBD% | Body Wash: TBD% | Bath Bombs: TBD% | |||
Body Lotion: TBD% | Body Scrub: TBD% | Candles: 100% | |||
Perfume: TBD% | Deodorant: TBD% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentsational Soaping Supply is not affiliated or associated with Febreze.
If you are interested in duplicating a fragrance please pay this fee. A representative will contact you for your specific needs and provide information about where to send in your product for duplication.
Have questions about duplication? Read all about our Fragrance Duplication FAQ or contact us at info@soapingsupply.com !
Description: ORANGE ZEST, MELON BALLS AND WILD BERRIES WITH A HINT OF EXOTIC MUSK.
* Compare our fragrance to Fresh Sparkling Snow® by Bath & Body Works.
Flashpoint: 198° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 100% | Body Wash: 100% | Bath Bombs: 100% | |||
Body Lotion: 100% | Body Scrub: 100% | Candles: 100% | |||
Perfume: 100% | Deodorant: 22.61% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.
A truly exotic blend! This is a duplicate of the discontinued Pier 1 scent. This seductive fragrance combines notes of sandalwood and santal to create this unusual fragrance.
This is an untested fragrance.
* Compare our fragrance to Golden Santal® by Pier 1 Imports.
Flashpoint: >200 ° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 4.20% | Body Wash: 4.20% | Bath Bombs: 4.20% | |||
Body Lotion: 8.92% | Body Scrub: 4.20% | Candles: 100% | |||
Perfume: 23.08% | Deodorant: 1.92% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Pier 1 Imports.
* Compare our fragrance to Grapefruit and Gardenia® by Wooden Wick.
Flashpoint: 191° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soaps and Candles
IFRA Maximum Skin Exposure Levels:
Soap: 10.34% | Body Wash: 10.34% | Bath Bombs: 10.34% | |||
Body Lotion: 2.71% | Body Scrub: 10.34% | Candles: 100% | |||
Perfume: 2.34% | Deodorant: 0.57% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Wooden Wick.
Description: A timeless, feminine, alluring blend of dark berries, midnight jasmine & rich amber
* Compare our fragrance to Into The Night® by Bath and Bodyworks.
Flashpoint: >200° F
Vanilla Content: 0.64%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:23.81
Soaps: 6.00% | Body Wash: 6.00% | Bath Bombs: 6.00% | |||
Body Lotion: 15.60% | Body Scrub: 6.00% | Candles: 100% | |||
Perfume: 1.56% | Deodorant: 3.83% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Bodyworks.
* Compare our fragrance to Juniper Fir + Balsam Spruce® by Wooden Wick.
Flashpoint: 191° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soaps and Candles
IFRA Maximum Skin Exposure Levels:
Soap: 61.48% | Body Wash: 61.48% | Bath Bombs: 61.48% | |||
Body Lotion: 27.29% | Body Scrub: 61.48% | Candles: 100% | |||
Perfume: 100% | Deodorant: 5.97% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentsational Soaping Supply is not affiliated or associated with Wooden Wick.
Description: Fresh, zesty lemon with sparks of bergamot perfect for an everyday bright, clean fragrance.
* Compare our fragrance to Kitchen Lemon® by Bath & Body Works.
Flashpoint: 181° F
Vanilla Content: 0.38%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 77.64% | Body Wash: 77.64% | Bath Bombs: 77.64% | |||
Body Lotion: 0.21% | Body Scrub: 77.64% | Candles: 100% | |||
Perfume: 0.21% | Deodorant: 0.21% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.
Description: Sexy and clean! This combination of lemon zing intertwine with warm amber and fragrant balsam in this fragrance accord.
* Compare our fragrance to Labdanum and Cashmere Musk® by Wooden Wick.
Flashpoint: 194 F
Vanilla Content: TBD%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soaps / Candles
IFRA Maximum Skin Exposure Levels:
Soap: 14.12% | Body Wash: 14.12% | Bath Bombs: 14.12% | |||
Body Lotion: TBD% | Body Scrub: 14.12% | Candles: 100% | |||
Perfume: TBD% | Deodorant: TBD% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Wooden Wick.
Description from Rustic Escentuals: A traditional Lemon Curd is a staple in afternoon English tea and is used as a delicate spread on finger cakes, sugar dusted scones, and tarts. Our rendition of this classic combines fresh, zesty lemons, warm vanilla extract and a hint of sugar blended with fresh cream. It's a refreshing and mouthwatering blend of tart and creaminess.
* Compare our fragrance to Lemon Curd® by Rustic Escentuals.
Flashpoint: 150 F
Vanilla Content: 2.40%
Country of Origin: USA
Phthalate Content: Not Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soaps: 10.34% | Body Wash: 10.34% | Bath Bombs: 10.34% | |||
Body Lotion: 1.29% | Body Scrub: 10.34% | Candles: 100% | |||
Perfume: 5.17% | Deodorant: 0.28% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Rustic Escentuals.
Light Blue Dolce & Gabbana Type is a clone of the original Dolce & Gabbana fragrance. It features a subtle scent that will bring you the attention you desire. Its mix of Sicilian lemon, delicious apple and delicate bellflower intertwine with dry paper-like bamboo, sweet jasmine and provocative white rose. on a bed of cedarwood, warm musk and golden amber. It is a unique scent that is perfect for every woman.
* Compare our fragrance to Light Blue® by Dolce & Gabbana.
It moves FAST in CP Soap!!! Probably better suited for HP Soaps.
Flashpoint: > 200° F
Vanilla Content: 0.00 %
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Fine Fragrance / Body Oil
IFRA Maximum Skin Exposure Levels:
Soap: 14.06% | Body Wash: 14.06% | Bath Bombs: 14.06% | |||
Body Lotion: 28.57% | Body Scrub: 14.06% | Candles: 100% | |||
Perfume: 19.87% | Deodorant: 4.87% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Dolce & Gabbana .
Description: An exciting blend of tart cherries, sensual rose, and mysterious woody notes yield an indulgently invigorating aroma.
* Compare our fragrance to Lost Cherry® by Tom Ford.
Flashpoint: 181° F
Vanilla Content: 7.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For: Fine Fragrance / Body Oil
IFRA Maximum Skin Exposure Levels:
Soap: 20.83% | Body Wash: 20.83% | Bath Bombs: 20.83% | |||
Body Lotion: 11.67% | Body Scrub: 20.83% | Candles: 100% | |||
Perfume: 7.50% | Deodorant: 1.67% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Tom Ford.
* Compare our fragrance to Luna® by Scentsy.
Flashpoint: >200° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 9.48% | Body Wash: 9.48% | Bath Bombs: 9.48% | |||
Body Lotion: 9.48% | Body Scrub: 9.48% | Candles: 100% | |||
Perfume: 9.48% | Deodorant: 0.95% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Victoria's Secret.
* Compare our fragrance to Marigold + Cedar Musk® by Makesy.
Flashpoint: >200° F
Vanilla Content: 1.16%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soaps and Candles
IFRA Maximum Skin Exposure Levels:
Soap: 5.38% | Body Wash: 5.38% | Bath Bombs: 5.38 % | |||
Body Lotion: % | Body Scrub: 5.38% | Candles: 100% | |||
Perfume: % | Deodorant: % | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentsational Soaping Supply is not affiliated or associated with Makesy.
Description: A delightfully sweet aroma that combines pumpkin spiced latte and toasty marshmallows with creamy sandalwood and sweet musk to produce a decadent, warm aroma..
* Compare our fragrance to Marshmallow Pumpkin Latte® by Bath & Body Works.
Flashpoint: 181° F
Vanilla Content: 12.50%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 18.90% | Body Wash: 18.90% | Bath Bombs: 18.90% | |||
Body Lotion: 52.91% | Body Scrub: 18.90% | Candles: 100% | |||
Perfume: 33.64% | Deodorant: 8.31% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.
Fresh tropical citrus notes intertwine with the refreshing water based notes of a tropical midnight sea scape. Warm, soft musk unites to enhance this amazing scent.
* Compare our fragrance to Midnight Blue Citrus® by Bath & Body Works.
Flashpoint: 189° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalate Content: Phthalate Free
Skin Safe: Yes
Oil Color: Pale Yellow
Formulated For: Soap / Candle
Essential Oils In Fragrance: None
Top Notes: Citrus, Tropical Fruit
Middle Notes: Water, Ozone
Bottom Notes: Musk
IFRA SHEET
IFRA Maximum Skin Exposure Levels:
Soap: 25.80% | Body Wash: 25.80% | Bath Bombs: 25.80% | |||
Body Lotion: 34.09% | Body Scrub: 25.80% | Candles: 100% | |||
Perfume: 100% | Deodorant: 7.27% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentsational Soaping Supply is not affiliated or associated with Bath and Body Works.
A LIGHT, CLEAN UNIQUE SCENT WITH A TART LEMON OPENING. A HEART OF ORCHIDS, JASMINE AND WHITE LILYS MELT INTO A SOFT, YET WARM COMBINATION OF SANDALWOOD AND MUSK.
This is an untested fragrance being brought in by our SSS - ISO Group.
* Compare our fragrance to Mokara® by Voluspa
Flashpoint: >200 ° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 13.33% | Body Wash: 13.33% | Bath Bombs: 13.33% | |||
Body Lotion: 19.46% | Body Scrub: 13.33% | Candles: 100% | |||
Perfume: 11.67% | Deodorant: 3.89% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Voluspa.
* Compare our fragrance to Nolita® by Bond #9.
Flashpoint: >200° F
Vanilla Content: 0.22%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Fine Fragrance / Body Oil
IFRA Maximum Skin Exposure Levels:
Soap: 20.00% | Body Wash: 20.00% | Bath Bombs: 20.00% | |||
Body Lotion: 20.00% | Body Scrub: 20.00% | Candles: 100% | |||
Perfume: 17.75% | Deodorant: 4.00% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bond #9.
A soothing leather fragrance composed of leather, oakmoss, patchouli, violet leaf, cardamom and jasmine sambac notes.
* Compare our fragrance to Ombre Leather by Tom Ford.
Flashpoint: >200° F
Vanilla Content: 0.20%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Fine Fragrance / Body Oil
IFRA Maximum Skin Exposure Levels:
Soap: 20.00% | Body Wash: 20.00% | Bath Bombs: 20.00% | |||
Body Lotion: 20.00% | Body Scrub: 20.00% | Candles: 100% | |||
Perfume: 20.00% | Deodorant: 4.00% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentsational Soaping Supply is not affiliated or associated with Tom Ford.
* Compare our fragrance to Orchid and Black Amber® by Wooden Wick.
Flashpoint: >200° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soaps and Candles
IFRA Maximum Skin Exposure Levels:
Soap: 0.97% | Body Wash: 0.97% | Bath Bombs: 0.97% | |||
Body Lotion: 2.16% | Body Scrub: 0.97% | Candles: 100% | |||
Perfume: 14.77% | Deodorant: 1.98% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Wooden Wick.
One of the most rare, precious, and expensive ingredients in a perfumer’s arsenal, Oud Wood is often burned in incense-filled temples. Exotic rose wood and cardamom give way to a smoky blend of rare oud wood, sandalwood, and vetiver. Tonka bean and amber add warmth and sensuality.
This fragrance is untested for candles and soaps.
* Compare our fragrance to Oud Wood by Tom Ford.
Notes:
Rare Oud Wood, Sandalwood, Chinese Pepper, Rosewood, Tonka Bean, Vanilla.
Style:
Rare. Exotic. Distinctive.
Flashpoint: >200° F
Vanilla Content: 0.03%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Fine Fragrance / Body Oil
IFRA Maximum Skin Exposure Levels:
Soap: 30.98% | Body Wash: 30.98% | Bath Bombs: 30.98% | |||
Body Lotion: 3.75% | Body Scrub: 30.98% | Candles: 100% | |||
Perfume: 3.75% | Deodorant: 3.75% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentsational Soaping Supply is not affiliated or associated with Tom Ford.
This beautiful Jo Malone dupe is like taking a juicy bite out of a red apple followed by hints of red roses, carnations and wild jasmine. A sexy blend of musk, suede and woods rounds out this scent.
* Compare our fragrance to Peony and Blush Suede® by Jo Malone.
Flashpoint: >200° F
Vanilla Content: 0.40%
Country of Origin: USA
Phthalate Content: Phthalate Free
Skin Safe: Yes
Oil Color: Pale Yellow
Formulated For: Soap / Candle
Essential Oils In Fragrance: Patchouli
Top Notes: Light Apple
Middle Notes: Rose, Carnation, Jasmine
Bottom Notes: Musk, Suede, Wood
IFRA SHEET
IFRA Maximum Skin Exposure Levels:
Soap: 44.44% | Body Wash: 44.44% | Bath Bombs: 44.44% | |||
Body Lotion: 6.87% | Body Scrub: 44.44% | Candles: 100% | |||
Perfume: 26.87% | Deodorant: 1.43% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentsational Soaping Supply is not affiliated or associated with Jo Malone.
Peppered Suede candle feels like a soft, fuzzy throw blanket or a warm hug -- the scent is so comforting and inviting. Lavender and bergamot are a winning combo for creating a relaxing setting, while amberwood and black pepper add spicy, smoky notes.
This is an untested fragrance.
* Compare our fragrance to Peppered Suede® by Bath & Body Works.
Flashpoint: >200° F
Vanilla Content: 0.02 %
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 27.78% | Body Wash: 27.78% | Bath Bombs: 27.78% | |||
Body Lotion: 62.22% | Body Scrub: 27.78% | Candles: 100% | |||
Perfume: 9.61% | Deodorant: 9.61% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.
* Compare our fragrance to Petals and Herbs® by Wooden Wick.
Flashpoint: >200° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soaps and Candles
IFRA Maximum Skin Exposure Levels:
Soap: 6.25% | Body Wash: 6.25% | Bath Bombs: 6.25% | |||
Body Lotion: 6.55% | Body Scrub: 6.25% | Candles: 100% | |||
Perfume: 1.63% | Deodorant: 1.34% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Wooden Wick.
Description: Sweet and juicy pink lady apples, spicy cinnamon and honey intermingle with fruit punch having hints of succulent peach. Subtly sweet nutmeg and watery melon harmoniously blend with warm musk, creamy vanilla, the tropical scent of coconut and sweet caramel to unite and enhance this fresh,gourmand fragrance.
* Compare our fragrance to Pink Apple Punch® by Bath & Body Works.
Flashpoint: 180° F
Vanilla Content: 0.38%
Country of Origin: USA
Phthalate Content: Phthalate Free
Formulated For: Soap / Candle
IFRA Maximum Skin Exposure Levels:
Soap: 2.44% | Body Wash: 2.44% | Bath Bombs: 2.44% | |||
Body Lotion: 2.44% | Body Scrub: 2.44% | Candles: 100% | |||
Perfume: 2.44% | Deodorant: 0.49% | Lip: 0.00% |
INCI (International No50.00menclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Bath and Body Works.
Description: It's a bubbly celebration of fizzy champagne and tart raspberries.
* Compare our fragrance to Prosecco and Pink Raspberries ® by Wooden Wick.
Flashpoint: >200° F
Vanilla Content: 0.00%
Country of Origin: USA
Phthalates: Phthalate Free
Formulated For: Soaps and Candles
IFRA Maximum Skin Exposure Levels:
Soap: 30.00% | Body Wash: 30.00% | Bath Bombs: 30.00% | |||
Body Lotion: 15.40% | Body Scrub: 30.00% | Candles: 100% | |||
Perfume: 66.67% | Deodorant: 6.14% | Lip: 0.00% |
INCI (International Nomenclature of Cosmetic Ingredients):
Fragrance
Common Name Ingredient List (FDA Approved):
Fragrance
Not sure how much fragrance to use in the product you want to make? First, you need to understand the maximum percentages that specific product base will typically accept.
CP, HP, CPOP Soap: 6%
MP Soap: 3%
Lotions and Scrubs: 1-2%
Bath Bombs, Salts & Soaks: 5-10%
Candles: 6-12% (depends upon wax used)
The actual percentage you end up using should be based upon the IFRA maximum, the maximum your product base will accept and what % of fragrance it takes to make your product smell awesome! A good starting place is using the LOWEST of these three percentages.
EXAMPLE:
Desired scent strength: 5%
Maximum CP base load: 6%
IFRA Maximum: 12%
This means you should start with 5% of this particular fragrance in your CP soap as that is the lowest of all three numbers. Remember, you are not limited to this percentage. You can use up to 12%. However, this is a great place to start.
We certify that the above fragrance oil is in compliance with the most recent standards published by the INTERNATIONAL FRAGRANCE ASSOCIATION (IFRA) as provided to us by our supplier.
It is the responsibility of our customers to ensure the safety of final product containing the fragrance oil by conducting all necessary tests. The IFRA standards are based on safety assessments by the Panel of Experts of the Research Institute for Fragrance Materials (RIFM) and are enforced by the IFRA Scientific Committee.
You can obtain the IFRA sheets along with other important documents under the "Downloads" tab. This information is updated yearly.
Scentational Soaping Supply is not affiliated or associated with Wooden Wick.